3084274 ALTERNATOR GP-CHARGING Caterpillar parts
C4.4
Rating:
Alternative (cross code) number:
CA3084274
308-4274
3084274
CA3084274
308-4274
3084274
INDUSTRIAL ENGINE,
Compatible equipment models: 3084274:
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01343996
Typical example
Loosen clamp (2) and remove hose (3) from breather tube (1). Withdraw hose (3) from clip (4) and remove the hose.
Illustration 2 g01346677
Remove bolt (6) and remove breather tube (1) from valve mechanism cover (5).
Remove O-ring seal (7) from breather tube (1). Disassembly Procedure
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 3 g01347094
Remove plastic cover (8) from valve mechanism cover (5).
Remove screws (9). Remove plate (10).
Remove assembly of diaphragm (11) and the cap (12). Remove spring (13). Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 4 g01347094
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Install spring (13). Install assembly of diaphragm (11) and cap (12).
Position plate (10) on valve mechanism cover (5) and install screws (9).
Use Tooling (A) to tighten screws (9) to a torque of 1.3 N m (12 lb in).
Install plastic cover (8) to valve mechanism cover (5). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g01346677
Install a new O-ring seal (7) to breather tube (1).
Install breather tube (1) to valve mechanism cover (5). Install bolt (6) and tighten the bolt to a torque of 9 N m (80 lb in).
Illustration 6 g01343996
Typical example
Connect hose (3) to breather tube (1). Tighten clamp (2). Install hose (3) into clip (4).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01343996
Typical example
Loosen clamp (2) and remove hose (3) from breather tube (1). Withdraw hose (3) from clip (4) and remove the hose.
Illustration 2 g01346677
Remove bolt (6) and remove breather tube (1) from valve mechanism cover (5).
Remove O-ring seal (7) from breather tube (1). Disassembly Procedure
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 3 g01347094
Remove plastic cover (8) from valve mechanism cover (5).
Remove screws (9). Remove plate (10).
Remove assembly of diaphragm (11) and the cap (12). Remove spring (13). Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 4 g01347094
Ensure that all components of the crankcase breather are clean and free from damage. Replace any components that are damaged.
Install spring (13). Install assembly of diaphragm (11) and cap (12).
Position plate (10) on valve mechanism cover (5) and install screws (9).
Use Tooling (A) to tighten screws (9) to a torque of 1.3 N m (12 lb in).
Install plastic cover (8) to valve mechanism cover (5). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 5 g01346677
Install a new O-ring seal (7) to breather tube (1).
Install breather tube (1) to valve mechanism cover (5). Install bolt (6) and tighten the bolt to a torque of 9 N m (80 lb in).
Illustration 6 g01343996
Typical example
Connect hose (3) to breather tube (1). Tighten clamp (2). Install hose (3) into clip (4).
Parts alternator Caterpillar catalog:
216, 216B, 232B, 242B, 3024C, 3054C, 3054E, 3056E, AP-300D, C4.4, CB-54, CB-64
3054C, 3054E, 3056E, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 442D, 442E, 444E, 444F, 450E, C4.4, C6.6, CB-54B, D3K...
3054C, 3054E, 420E, 914G, AP-600D, AP-655D, AP1000E, AP1055E, AP555E, BG500E, BG600D, BG655D, C4.4, C6.6, CP-56, CP-76, CS-54B, CS-64, CS-74, IT14G, IT14G2, M313D, M315C, M315D, M315D 2, M316D, M317D ...
3054, 3054B, 3054C, 3054E, 3056, C3.3, C4.4, SPF343C
C4.4, C6.6
3024C, 3054C, 3054E, 315C, AP555E, BG500E, C2.2, C4.4, CP-573E, CP-663E, CS-323C, CS-423E, CS-54, CS-563E, CS-583E, CS-663E, CS-683E
3054C, 3054E, 3056E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 318D2 L, AP-650B, AP-800D, BB-760, C4.4, CP-433E, CP-533E, CP-573E, CP-663E, CS-423E, CS-433E, CS-533E, CS-563E, CS-583E, CS-663E, CS-6...
3397768
ALTERNATOR GP-CHARGING
3054C, AP-300, C4.4
3054C, AP-300, C4.4
3035774
ALTERNATOR GP-CHARGING
C4.4, D3K XL, D4K XL, D5K LGP
C4.4, D3K XL, D4K XL, D5K LGP
2706310
ALTERNATOR GP-CHARGING
904B, 904H
904B, 904H
3117455
ALTERNATOR GP-CHARGING
C4.4, SPF343C
C4.4, SPF343C