ALTERNATOR GP-CHARGING 3173038 - Caterpillar

3173038 ALTERNATOR GP-CHARGING Caterpillar parts C2.2

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3173038
317-3038
3173038

Caterpillar 3173038 ALTERNATOR GP-CHARGING

Buy ALTERNATOR GP-CHARGING 3173038 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

Compatible equipment models: 3173038:

INDUSTRIAL ENGINE C2.2 Caterpillar

Number on catalog scheme:

Caterpillar 3173038 Parts scheme ALTERNATOR GP-CHARGING

For full view, you need register

Caterpillar SIS machinery equipment:

Caterpillar SIS

C2.2 Industrial Engine C6M00001-UP » 317-3038 ALTERNATOR GP-CHARGING

C2.2 Industrial Engine G7L00001-UP » 317-3038 ALTERNATOR GP-CHARGING

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

C2.2 Industrial Engine C6M00001-UP

310-0598: ENGINE AR-PRIMARY » SEBP45440027
310-1532: ENGINE AR-PRIMARY » SEBP45440028
354-8330: ENGINE AR-PRIMARY » SEBP45440063
417-8393: ENGINE AR-PRIMARY » SEBP45440067
424-4164: ENGINE AR-PRIMARY » SEBP45440069
438-7874: ENGINE AR-PRIMARY » SEBP45440081

C2.2 Industrial Engine G7L00001-UP

310-0598: ENGINE AR-PRIMARY » SEBP52840025

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1 Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02520937
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g03792138
Remove bottom guard (1).
Illustration 3 g03792139
Remove bolts (2) and hose assembly (3). Remove hose assemblies (4).
Illustration 4 g03792141
Remove cover assembly (5).
Illustration 5 g03792143
Remove bolts (6) and load control valve (stick cylinder) (7). Installation Procedure
Install load control valve (stick cylinder) (7) in the reverse order of removal.
Check the hydraulic oil level. Refer to Operations and Maintenance Manual, "Hydraulic System Oil Level - Check".