3215183 ALTERNATOR GP-CHARGING Caterpillar parts
CD-54
Rating:
Alternative (cross code) number:
CA3215183
321-5183
3215183
CA3215183
321-5183
3215183
VIBRATORY COMPACTOR,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
$3.58
27 Sep 2018
500 Hundredths Pounds
Toro: Toro
Toro Ring-snap Part # 32151-83
Toro Ring-snap Part # 32151-83
Toro Ring-snap Part # 32151-83
For full view, you need register
Compatible equipment models: 3215183:
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Information:
Disassembly Procedure
Start By:
Remove the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve - Remove" in this manual.
Thoroughly clean the outside of the travel brake valve prior to disassembly. Note: During the disassembly of the travel brake valve, place identification marks on all of the components in the valve assembly for assembly purposes. Do not mix the parts.
Illustration 1 g00484002
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove two cover mounting bolts (1) that are diagonal to each other. Slowly loosen the remaining two cover mounting bolts. Alternate between the two cover mounting bolts and loosen the bolts in small increments until the spring pressure is released. Remove cover (2).
Repeat Step 2 in order to remove the cover on the opposite side of the travel brake valve.
Illustration 2 g00484003
Remove O-ring seals (5) from the valve body. Remove springs (3) and washers (4) from the valve body. Remove spool assembly (7) from the valve body.
Remove crossover relief valve assemblies (8) from the valve body.
Remove two check valves (6) from the valve body. Remove the plugs, O-ring seals, springs, and valves from the valve body.
Illustration 3 g00484004
Use the following procedure to disassemble crossover relief valves (8).
Remove two backup rings (17) and O-ring seal (9) from valve body (10).
Remove nut (24), screw (16), O-ring seal (15), backup ring (23), stopper (22), O-ring seal (21), backup ring (13), and backup ring (14).
Remove piston (20), valve group (12), spring (19), spring (11), and seat (18) from valve body (10).
Start By:
Remove the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve - Remove" in this manual.
Thoroughly clean the outside of the travel brake valve prior to disassembly. Note: During the disassembly of the travel brake valve, place identification marks on all of the components in the valve assembly for assembly purposes. Do not mix the parts.
Illustration 1 g00484002
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove two cover mounting bolts (1) that are diagonal to each other. Slowly loosen the remaining two cover mounting bolts. Alternate between the two cover mounting bolts and loosen the bolts in small increments until the spring pressure is released. Remove cover (2).
Repeat Step 2 in order to remove the cover on the opposite side of the travel brake valve.
Illustration 2 g00484003
Remove O-ring seals (5) from the valve body. Remove springs (3) and washers (4) from the valve body. Remove spool assembly (7) from the valve body.
Remove crossover relief valve assemblies (8) from the valve body.
Remove two check valves (6) from the valve body. Remove the plugs, O-ring seals, springs, and valves from the valve body.
Illustration 3 g00484004
Use the following procedure to disassemble crossover relief valves (8).
Remove two backup rings (17) and O-ring seal (9) from valve body (10).
Remove nut (24), screw (16), O-ring seal (15), backup ring (23), stopper (22), O-ring seal (21), backup ring (13), and backup ring (14).
Remove piston (20), valve group (12), spring (19), spring (11), and seat (18) from valve body (10).
Parts alternator Caterpillar catalog:
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436B, 436C, 438B, 438C, 438D, 442D, 908, CB-434D, CB-534D, CB-564D, CB-634D, CD-54
2717077
ALTERNATOR GP-CHARGING
3054C, AP-300
3054C, AP-300
AP555E, BG500E, C4.4, CS-54
3011C, C1.1, CB-14
3512, 988G, AP-1055D, BG-2455D, BG-260D, C32, D7R II, D9R
2985109
ALTERNATOR GP-CHARGING
AP-300D, C4.4
AP-300D, C4.4
7C5796
ALTERNATOR GP-CHARGING
3208, PS-500
3208, PS-500
3241511
ALTERNATOR GP-CHARGING
CP-44, CS-44
CP-44, CS-44
3062320
ALTERNATOR GP-CHARGING
420E, AP555E, BG500E, C4.4, M313D, M315D, M315D 2, M317D 2
420E, AP555E, BG500E, C4.4, M313D, M315D, M315D 2, M317D 2
3015158
ALTERNATOR GP-CHARGING
CB-54, CB-64
CB-54, CB-64