ALTERNATOR GP 3248087 - Caterpillar

Illustration 1 g03841251The Product Identification Number (PIN) plate is located on the rear of the machine. The plate may have the following information:
Illustration 2 g02436556Manufacturer Name and Address ____________________Model number (A)____________________Product Identification Number (B)____________________Service Information Plate (C)____________________Year of Manufacture Plate (If Required) (D)____________________CE Plate (If Required) (E)____________________Country of Origin Info Plate (If Required) (F)____________________
Illustration 3 g00123229
Typical engine serial number plate
Engine Information and Serial Number Plate____________________Eurasian Economic Union
For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.
Illustration 4 g06094564The Month and Year of Manufacture are on the PIN plate.Manufacturer Information
Manufacturer:Caterpillar Paving Products Inc.,
9401 85 th Avenue North
Brooklyn park MN, 55445-2199
Entity authorized to communicate on request as required by Customs Union Technical Regulations of the Eurasian Economic Union:Caterpillar Eurasia LLC
75, Sadovnicheskaya Emb.
Moscow 115035, Russia
Certification
European Union
Illustration 5 g01880193This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________
Illustration 6 g01120192This plate is positioned on the bottom left side of the plate for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 1998/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.For manufacturer name and address and the country of origin, see the PIN plate.Sound Certification
Illustration 7 g00933634
A typical example of this film is shown. Your machine may have a different value.
If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "ISO 6394:1998".Product Link
If equipped, this message is used to verify the certification of the Product Link as an RF transmitter. The following specifications are provided to aid in ensuring compliance with all local regulations:
Table 1
Operating frequency range 148 to 150 MHz
Transmitter power 5 W This message is located on the control group for the Product Link. The control group is located on the rear wall of the engine access cover.
Illustration 8 g01261742
This machine is equipped