3E7772 ALTERNATOR GP-CHARGING Caterpillar parts
914G, IT14G
Rating:
Alternative (cross code) number:
CA3E7772
3E-7772
3E7772
CA3E7772
3E-7772
3E7772
Weight: 14 pounds 6 kg.
COMPACT WHEEL LOADER, INTEGRATED TOOLCARRIER,
Related part:
3E7772
ALTERNATOR GP
0R9437
R
Cross Reference:
CATERPILLAR
3E7772,
CV PSH
1012117920,
1022110430,
270402220,
270402220B,
KTR393008100,
OR9437,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Stevens Lake Parts One New Alternator Various Applications & Models Replaces 3E-7772
Stevens Lake Parts One New Alternator || This Is An Aftermarket Part Made To Replace Its OEM Counterpart. || Interchangeable With 3E-7772 || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
Stevens Lake Parts One New Alternator || This Is An Aftermarket Part Made To Replace Its OEM Counterpart. || Interchangeable With 3E-7772 || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
Stevens Lake Parts One New Alternator Various Applications & Models Replaces 0R9437 101211-7920 12475 290-469 3E7772 90-29-5346 ELV40-0102
Stevens Lake Parts One New Alternator || This Is An Aftermarket Part Made To Replace Its OEM Counterpart. || Interchangeable With 0R9437 101211-7920 12475 290-469 3E7772 90-29-5346 ELV40-0102 || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
Stevens Lake Parts One New Alternator || This Is An Aftermarket Part Made To Replace Its OEM Counterpart. || Interchangeable With 0R9437 101211-7920 12475 290-469 3E7772 90-29-5346 ELV40-0102 || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product.
DB Electrical 400-52218 Alternator Compatible With/Replacement For 914 Caterpillar Wheel Loader 914G Cat 1995 1996 1997 1998 1999 2000 2001 2002 2003 1995 1996 1997-2003/3E7772, OR9437
DB Electrical Spec: Unit Type: Alternator, Voltage: 24, Rotation: CW, Amperage: 60, Clock: 12, Pulley Class: V2, Regulator: IR, Fan Type: IF || Replaces OEM Numbers: ARROWHEAD: 400-52218, ARROWHEAD (OEM): ND101211-7920, CATERPILLAR: 3E-7772, OR9437, DENSO: 101211-7920, J & N: 400-52218, LESTER: 12475, UNIPOINT: ALT-6182 || Compatible With/Replacement For: CATERPILLAR: 914G 1995-2003 || 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement. || 100% New aftermarket Alternator built to meet OEM specifications for Caterpillar
DB Electrical Spec: Unit Type: Alternator, Voltage: 24, Rotation: CW, Amperage: 60, Clock: 12, Pulley Class: V2, Regulator: IR, Fan Type: IF || Replaces OEM Numbers: ARROWHEAD: 400-52218, ARROWHEAD (OEM): ND101211-7920, CATERPILLAR: 3E-7772, OR9437, DENSO: 101211-7920, J & N: 400-52218, LESTER: 12475, UNIPOINT: ALT-6182 || Compatible With/Replacement For: CATERPILLAR: 914G 1995-2003 || 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement. || 100% New aftermarket Alternator built to meet OEM specifications for Caterpillar
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 3E7772:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B Plate
50.8 mm (2 inches) x 102 mm (4 inches) x 6 mm (0.25 inches) 2
C 1P-1857 Retaining Ring Pliers 1
D Tube
57 mm (2.25 inch) diameter x 6 mm (0.25 inch) thick wall x 203 mm (8 inches) long 1
E 1P-0510 Driver Group 1
F 2S-3230 Bearing Lubricant
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean all of the parts. Apply Tooling (F) to all of the bearings and the drive assembly. Before assembly, coat all of the other parts with an SAE 10 grade of oil.
Illustration 1 g01054313Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Install O-ring seals (54) on rotor cylinder (53). Install rotor cylinder (53) into motor housing (3). Orient pin (55) of rotor cylinder (53) with slot (56) in motor housing (3).
Illustration 2 g00598181
Install O-ring seal (52) onto rotor cylinder (53).
Illustration 3 g00598221
Install rear end plate (45) on the shaft of rotor (48).
Illustration 4 g01054318Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (46) over the shaft of rotor (48).
Illustration 5 g01054320
Install bearing (44) over the shaft of rotor (48). The bearing will fit into the rear end plate.
Illustration 6 g01054321
Install rotor clamp nut (42) on the shaft of rotor (48). Orient the shoulder of nut (42) toward the bearing.
Illustration 7 g00598201
Tighten the rotor clamp nut in order to obtain a clearance of 0.03 to 0.08 mm (0.001 to 0.003 inch) between the rear end plate and the rotor. Measure the clearance with a feeler gauge. Tighten hex socket head bolt (43) into the rotor clamp nut. Measure the clearance again.
Illustration 8 g00598207
Install rotor (48) into motor housing (3). Align pin (57) into the slot of the rear end plate.
Illustration 9 g01054297
Install vanes (47) into rotor (48).
Illustration 10 g01054327
Install front end plate (50) onto rotor (48). Align small hole (58) of front end plate (50) onto rotor pin (59).
Illustration 11 g00598420
Install washers (51) over the shaft of the rotor onto the front end plate.
Illustration 12 g00598225
Place bearing (49) onto the front end plate.
Illustration 13 g00598445
Use Tooling (E) and a suitable press in order to complete the installation of bearing (49).
Illustration 14 g00598227
Install rotor pinion (40) with the hex head bolt. Tighten the bolt to a torque of 120 N m (90 lb ft).
Illustration 15 g00598230Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (60) onto the rotor bearing that is on the rear end plate. Install cover (39) onto motor housing (3).
Illustration 16 g00598232
Install bearing (33) and new ring (32) onto drive shaft (17).
Illustration 17 g00598234
Use Tooling (D) with a suitable press in order to complete the installation of the new ring.
Illustration 18 g00598241
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install these parts into drive shaft (17): bolt (23), lockwasher (24), washer
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1854 Retaining Ring Pliers 1
B Plate
50.8 mm (2 inches) x 102 mm (4 inches) x 6 mm (0.25 inches) 2
C 1P-1857 Retaining Ring Pliers 1
D Tube
57 mm (2.25 inch) diameter x 6 mm (0.25 inch) thick wall x 203 mm (8 inches) long 1
E 1P-0510 Driver Group 1
F 2S-3230 Bearing Lubricant
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Thoroughly clean all of the parts. Apply Tooling (F) to all of the bearings and the drive assembly. Before assembly, coat all of the other parts with an SAE 10 grade of oil.
Illustration 1 g01054313Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
Install O-ring seals (54) on rotor cylinder (53). Install rotor cylinder (53) into motor housing (3). Orient pin (55) of rotor cylinder (53) with slot (56) in motor housing (3).
Illustration 2 g00598181
Install O-ring seal (52) onto rotor cylinder (53).
Illustration 3 g00598221
Install rear end plate (45) on the shaft of rotor (48).
Illustration 4 g01054318Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (46) over the shaft of rotor (48).
Illustration 5 g01054320
Install bearing (44) over the shaft of rotor (48). The bearing will fit into the rear end plate.
Illustration 6 g01054321
Install rotor clamp nut (42) on the shaft of rotor (48). Orient the shoulder of nut (42) toward the bearing.
Illustration 7 g00598201
Tighten the rotor clamp nut in order to obtain a clearance of 0.03 to 0.08 mm (0.001 to 0.003 inch) between the rear end plate and the rotor. Measure the clearance with a feeler gauge. Tighten hex socket head bolt (43) into the rotor clamp nut. Measure the clearance again.
Illustration 8 g00598207
Install rotor (48) into motor housing (3). Align pin (57) into the slot of the rear end plate.
Illustration 9 g01054297
Install vanes (47) into rotor (48).
Illustration 10 g01054327
Install front end plate (50) onto rotor (48). Align small hole (58) of front end plate (50) onto rotor pin (59).
Illustration 11 g00598420
Install washers (51) over the shaft of the rotor onto the front end plate.
Illustration 12 g00598225
Place bearing (49) onto the front end plate.
Illustration 13 g00598445
Use Tooling (E) and a suitable press in order to complete the installation of bearing (49).
Illustration 14 g00598227
Install rotor pinion (40) with the hex head bolt. Tighten the bolt to a torque of 120 N m (90 lb ft).
Illustration 15 g00598230Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Install O-ring seal (60) onto the rotor bearing that is on the rear end plate. Install cover (39) onto motor housing (3).
Illustration 16 g00598232
Install bearing (33) and new ring (32) onto drive shaft (17).
Illustration 17 g00598234
Use Tooling (D) with a suitable press in order to complete the installation of the new ring.
Illustration 18 g00598241
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install these parts into drive shaft (17): bolt (23), lockwasher (24), washer
Caterpillar SIS machinery equipment:
Caterpillar SIS
914G Wheel Loader 7ZM00001-00439 (MACHINE) POWERED BY 3054 Engine »
3E-7772
ALTERNATOR GP-CHARGING
IT14G Integrated Toolcarrier 1WN00001-00659 (MACHINE) POWERED BY 3054 Engine »
3E-7772
ALTERNATOR GP-CHARGING
IT14G Integrated Toolcarrier 1WN00660-UP (MACHINE) »
3E-7772
ALTERNATOR GP-CHARGING
914G Wheel Loader 7ZM00440-UP (MACHINE) POWERED BY 3054 Engine »
3E-7772
ALTERNATOR GP-CHARGING
Caterpillar parts catalog:
Parts alternator Caterpillar catalog:
1122622
ALTERNATOR GP-CHARGING
914G, IT14G
914G, IT14G
1239815
ALTERNATOR GP-CHARGING
938F, IT38F
938F, IT38F
1150496
ALTERNATOR GP-CHARGING
D10R, D9R
D10R, D9R
928G, IT28G
1563871
ALTERNATOR GP-CHARGING
928G, IT28G
928G, IT28G
1563870
ALTERNATOR GP-CHARGING
928G, IT28G
928G, IT28G
1178280
ALTERNATOR GP-CHARGING
928G, IT28G
928G, IT28G
1122622
ALTERNATOR GP-CHARGING
914G, IT14G
914G, IT14G