ALTERNATOR 3T8753 - Caterpillar

Illustration 1 g00270500
For instructions on setting the valve bridge and the valve lash, refer to Systems Operation/Testing and Adjusting, "Valve Lash and Valve Bridge Adjustment". (1) Dimension Bore in rocker arm ... 24.803 0.013 mm (0.9765 0.0005 inch)
Illustration 2 g01023282
(2) BoltRefer to Specifications, "Cylinder Head" for the procedure to tighten the bolts for the rocker arm assemblies. (3) Locknut Torque ... 30 4 N m (22 3 lb ft) (4) Locknut Torque ... 47 9 N m (35 7 lb ft) (5) Valve lash Inlet valves ... 0.38 0.10 mm (0.015 0.004 inch) Exhaust valves ... 1.02 0.10 mm (0.040 0.004 inch) (6) Dimension Distance from the top of the cylinder head to the top of the dowel ... 53.3 0.5 mm (2.10 0.02 inch) (7) Dimension Diameter of new dowel ... 11.008 0.003 mm (0.4334 0.0001 inch) Bore in bridge for dowel ... 11.13 0.05 mm (0.438 0.002 inch) Bore in head for dowel ... 10.968 0.020 mm (0.4318 0.0008 inch) (8) DimensionFor installation of the valve lifter, lubricate the bore for the valve lifter and lubricate the cam with a 50/50 mixture of engine oil and 8T-2998 Lubricant . Diameter of new valve lifter ... 27.896 0.013 mm (1.0983 0.0005 inch) Bore in block for valve lifter ... 27.953 0.019 mm (1.1005 0.0007 inch) (9) Guide springIf a guide spring is removed, the spring cannot be used again. Always install a new spring.
Illustration 3 g00270548
(10) Spring Length under test force ... 74.2 mm (2.92 inch) Test force ... 45 to 53 N (10 to 12 lb) Free length after test ... 114.3 mm (4.50 inch) Inside diameter ... 25.4 mm (1.00 inch) (11) Dimension Distance from the flat surface of the bracket to the top of the dowel pin ... 12.7 1.0 mm (0.50 0.04 inch) (12) End play End play for the rocker arms (both ends) ... 0.30 to 1.40 mm (0.012 to 0.055 inch) (13) Washer ... If necessary, use the washer in order to obtain the end play.