ALTERNATOR GP-CHARGING 4187664 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00787626
Remove nuts (1), pulley (3), and pulley (4) .
Move damper (2) out approximately 25.4 mm (1.00 inch). Fasten a hoist to the damper. Remove damper (2). The weight of the damper is approximately 36 kg (80 lb).
Illustration 2 g00787632
Remove bolts (5) and adapter (6). Remove studs (7) if a replacement is necessary.