ALTERNATOR GP 4209557 - Caterpillar

Illustration 2 g02617921
Right side view
Table 2
Specification for 240-6651 Cylinder Block Gp and 240-6653 Cylinder Block Gp
Item Qty Part Specification Description
7 4 5F-9657 O-Ring Seal Lubricate the bore lightly with 5P-3975 Rubber Lubricant.
J 2 7N-2047 Dowel Extension of the dowel from the front face of the cylinder block is 6.0 0.5 mm (0.24 0.02 inch).
K 1 7N-2047 Dowel Extension of the dowel from the rear face of the cylinder block is 6.0 0.5 mm (0.24 0.02 inch).
L 2 4N-0683 Dowel Extension of dowels from the rear face of the cylinder block is 19.0 0.5 mm (0.75 0.02 inch).
M 2 7N-2044 Dowel Extension of dowels from the front face of the cylinder block is 40.0 0.5 mm (1.58 0.02 inch). Camshaft Bearing Position
Illustration 3 g03113603
Right side view
Table 3
Specification for 240-6651 Cylinder Block Gp and 240-6653 Cylinder Block Gp
Item Qty Part Specification Description
The camshaft bearings are installed into the cylinder block at the following positions:
- - - Distance (A) from front face of cylinder block is 2200.0 1.5 mm (86.61 0.06 inch).
- - - Distance (B) from front face of cylinder block is 1930.0 1.5 mm (75.98 0.06 inch).
- - - Distance (C) from front face of cylinder block is 1660.0 1.5 mm (65.35 0.06 inch).
- - - Distance (D) from front face of cylinder block is 1390.0 1.5 mm (54.72 0.06 inch).
- - - Distance (E) from front face of cylinder block is 1120.0 1.5 mm (44.09 0.06 inch).
- - - Distance (F) from front face of cylinder block is 850.0 1.5 mm (33.46 0.06 inch).
- - - Distance (G) from front face of cylinder block is 580.0 1.5 mm (22.83 0.06 inch).
- - - Distance (H) from front face of cylinder block is 310.0 1.5 mm (12.20 0.06 inch).
- - - Distance (J) from front face of cylinder block is 40.0 1.5 mm (1.58 0.06 inch).