ALTERNATOR GP-CHARGING 4263396 - Caterpillar

Illustration 4 g02264093
Right side view of enclosure
Illustration 5 g02229419
Left side view of enclosureUniversal Warning (1)The universal safety message is located on each side of the generator enclosure and on each side of the terminal box.
g01370904
Do not operate or work on this product unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Automatic Starting (2)The safety message for automatic starting is located on each side of the enclosure.
g01392484
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Hot Surface (3)These safety messages are located on each side of the radiator and on each side of the barrel of the generator.
g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Lifting the Genset (4)This safety message for lifting the genset is located on right, left, and rear panels of the generator enclosure.
g01433231
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Hot Fluid Under Pressure (5)The safety message for hot fluid under pressure is located on top of the radiator near the radiator cap.
g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Electrical Shock (6)The safety message for electrical shock is located on the sides of the terminal box.
g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.