ALTERNATOR GP-CHARGING 4286641 - Caterpillar

Illustration 1 g01572438
Top view (1) Torque for the pipe assembly ... 125 15 N m (90 11 lb ft) (2) Torque for the connector assembly ... 75 8 N m (55 6 lb ft) (3) Torque for 24 bolts ... 270 40 N m (200 30 lb ft) (4) Apply 1U-8846 Gasket Sealant to the flange surface of the housing and to the gear prior to assembly. (5) Torque for the breather assembly ... 45.0 4.5 N m (33 3 lb ft) (6) Apply 4C-5599 Anti-Seize Compound to the outside diameter and the inside diameter of the mating parts of two roller bearings. (7) The mounting area, the contact area of bolt and the shaft pinion must be free from paint. Prior to assembly, the contact surface of bolt, the washer and the tightened parts must be clean and free of protective coating and oil. (8) Lubricate the sealing lip of two lip type seals lightly with the lubricant that is being sealed. Lubricate the circumference of two lip type seals with clean grease when the seal is installed in the cage. (F) Distance from the edge of the spring pin hole to the stake mark ... 2.25 0.75 mm (0.089 0.030 inch) (9) Shutoff valve Torque for installing the shutoff valve ... 28 to 31 N m (250 to 275 lb in) Torque for shutting off the shutoff valve ... 2.9 0.5 N m (26 4 lb in)