ALTERNATOR GP-CHARGING 4362854 - Caterpillar

the following to use the Cat® Electronic Technician (Cat ET) service tool to determine diagnostic codes:
Connect Cat ET to the machine.
Turn the keyswitch to the RUN position.
Start Cat ET.Cat ET will initiate communications with the machine ECMs.After communication has been established, Cat ET will list the ECMs.
Select the desired ECM.
View the list of diagnostic codes.
Troubleshoot the diagnostic codes. See the test procedure for the specific diagnostic code.Active Diagnostic CodesThe corrective procedures may cause new diagnostic codes to be logged. Before performing any procedure, make a list of all the active diagnostic codes. Clear the diagnostic codes as the problems that caused the diagnostic codes are corrected.Cat ET displays the following active diagnostic code information:
Component identifier (CID)
Failure mode identifier (FMI)
Text description of the problemLogged Diagnostic CodesCat ET displays the following logged diagnostic code information:
Component identifier (CID)
Failure mode identifier (FMI)
Text description of the problem
Number of occurrences of the problem
Time stamp of the first occurrence of the problem
Time stamp of the most recent occurrence of the problemCat ET logs diagnostic codes that are continuous and intermittent. Note: Diagnostics are logged in non-volatile memory. On powerup, the ECM clears any diagnostic codes that have not been detected or active within the last 150 hours of machine operation.