ALTERNATOR AS 4383519 - Caterpillar

4383519 ALTERNATOR AS Caterpillar parts 901C, 902C, 903C

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4383519
438-3519
4383519

Weight: 9 pounds 4 kg.

Buy ALTERNATOR AS 4383519 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER,

Compatible equipment models: 4383519:

COMPACT WHEEL LOADER 901C 902C 903C Caterpillar

Number on catalog scheme: 1

Caterpillar 4383519 Parts scheme ALTERNATOR AS

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

903D Compact Wheel Loader MZY00001-UP (MACHINE) POWERED BY C2.4 Engine

486-5239: ALTERNATOR GP-CHARGING » M00908090073

901C Compact Wheel Loader W4T00001-UP (MACHINE) POWERED BY C1.8 Engine

438-2724: ALTERNATOR GP-CHARGING » SEBP68180064

902C Compact Wheel Loader W5T00001-UP (MACHINE) POWERED BY C2.4 Engine

439-3382: ALTERNATOR GP-CHARGING » SEBP68190064

903C Compact Wheel Loader W6T00001-UP (MACHINE) POWERED BY C2.4 Engine

439-3382: ALTERNATOR GP-CHARGING » SEBP68200063

903C Compact Wheel Loader MW400001-UP (MACHINE) POWERED BY C2.4 Engine

439-3382: ALTERNATOR GP-CHARGING » SEBP74870069
454-7325: ALTERNATOR GP-CHARGING » SEBP74870071

902C2 Compact Wheel Loader YKT00001-UP (MACHINE) POWERED BY C2.4 Engine

477-7987: ALTERNATOR GP-CHARGING » SEBP76610068

903C2 Compact Wheel Loader MW800001-UP (MACHINE) POWERED BY C2.4 Engine

477-7987: ALTERNATOR GP-CHARGING » SEBP76620095
486-5239: ALTERNATOR GP-CHARGING » SEBP76620097

Information:

Illustration 1 g01003426
Position magnet (3) so that the center of magnet (3) is aligned with the center of control group (1) .
Loosen bolts (2). Adjust control group (1) so that the face is 8 2 mm (0.32 0.08 inch) away from magnet (3) .
Tighten bolts (2) .
Loosen bolts (4). Adjust magnet (3) so that the lower edge of magnet (3) is even with the center of control group (1) .
Tighten bolts (4) .
To check the adjustment, start the engine. Move the lift control lever to the RAISE detent position.When the bucket or the attachment reaches the preset lift height, the lift control lever should return to the HOLD position.
If the kickout position is not correct, perform Steps 1 through 7 again.