ALTERNATOR GP-CHARGING 4524704 - Caterpillar

Specifications
Illustration 1 g02291814
Typical example (1) Tighten the connection to the following torque. ... 20 N m (15 lb ft)
Illustration 2 g02291815
Typical example (2) (3) Tighten the bolts to the following torque. ... 22 N m (16 lb ft)Removal Procedure
Personal injury or death may result from failure to adhere to the following procedures.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g03347754
Remove harness assembly (1). Remove hose assemblies (3) and (5) .
Remove bolts (4) and fuel transfer pump (2) .Installation Procedure
Install fuel transfer pump (2) in the reverse order of removal.