ALTERNATOR GP-CHARGING 4708898 - Caterpillar

Illustration 29 g02453129
Accounts screen
Touch the "User field" on the "Accounts" screen.
Enter the user name, access level, and password.
Enter the user name and password with the virtual keypad.
Select the appropriate radio button for access level. See the screen in Illustration 30
Illustration 30 g02453130
Adding user data to accounts
When you successfully add account information, the screen should appear as in Illustration 31.
Illustration 31 g02453133
Account information added successfully
Configuration
The configuration screen allows the operator to set up several parameters that configure the system for operation.
Touch the "Navigation" icon.
Select "Configuration" from the list of buttons on the right. The screen appears as in Illustration 32.
Illustration 32 g02453182
Configuration screen
The "Configuration" screen set includes the following:
Display Network Configuration
IP Address Configurations
Email Configuration
Backup Configuration
Restore Configuration
Reboot (Display)
Export Configuration
Import Configuration
Resynchronize time to UPS
Calibrate TouchscreenThere are three screens in the configuration screen set.Configuration Screen 1 - Display Network and MMU IP Address Configurations
Display Network Configuration
From the Display Network Configuration selection on screen one (1) of the Configuration screen, you can configure the following:
Display IP Address
Gateway IP Address
Subnet Mask AddressNote: Information for configuring network settings should be provided by the site network administrator. Contact the network administrator to make sure that your network settings are current.The IP address allows your UPS to communicate system information via the touchscreen display. The IP address is also required for UPS network communication.IP Address Configuration
The IP address allows the UPS system to communicate information about MMU performance. Illustration 33 shows both display and IP address configuration and the touchscreen keypad.
Illustration 33 g02453201
Configuration screen for display network and mmu ip address configuration
Touch the entry block for either the "Display Network Configuration" (for the display ) or the "IP Address Configuration" (for the MMU) as desired. The virtual keypad appears to allow you to enter the required values. Configuration Screen 2 - Email Configuration
You can configure the display email capability from the second of the three configuration screens. When you enable system email, you are allowing the display to send alarms and notices to a designated destination. Refer to Illustration 34.
Illustration 34 g02453205
To fill out the parameters required to allow the display to communicate notices and alarms, touch the required entry field. Depending on the parameter type either a numeric or an alphanumeric keypad will appear. Refer to Illustration 35.
Save the email configuration by touching the Save Email Configuration button.
Test the email configuration by touching the "Send Test Email" button. Note: The UPS has an independent email configuration accessible through UPSView. The capabilities provide redundancy for the email notification system.
Illustration 35 g02453237
Entering email configuration parameters
Configuration Screen 3 - Managing System Configurations
Screen three allows you to select any one of several operations that may be needed to help manage the UPS system configuration. Illustration 36 is a picture of that screen.
Illustration 36 g02453238
System configuration maintenance screen
The configuration "Maintenance Screen" allows you to perform the following tasks used to maintain or enhance system performance:
Backup configuration allows you to back up the existing configuration stored by the touchscreen computer.
Restore configuration allows you to overwrite the existing configuration and reboot the display.
Reboot allows you to reboot the display.
Export configuration allows