ALTERNATOR GP-CHARGING 5178352 - Caterpillar

5178352 ALTERNATOR GP-CHARGING Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5178352
517-8352
5178352

Caterpillar 5178352 ALTERNATOR GP-CHARGING

Buy ALTERNATOR GP-CHARGING 5178352 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 5178352 Parts scheme ALTERNATOR GP-CHARGING

For full view, you need register

Information:

Personal injury or death can result from sudden machine movement.Sudden movement of the machine can cause injury to persons on or near the machine.To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine.
Drive the machine to a smooth, horizontal surface.
Illustration 1 g01542296
Move propel lever (1) to the NEUTRAL position.
Rotate propel speed dial (2) to the MINIMUM position.
Move parking brake switch (3) to the ON position.
Illustration 2 g01542333
Move screed lift switch (4) to the RAISE position. Completely lift the screed.
Illustration 3 g01542374
Engage screed lock mechanism (5) on both sides of the machine.
Move screed lift switch (4) to the FLOAT position. Allow the tow arms to rest on the screed locks.
Move screed lift switch (4) to the HOLD position.
Illustration 4 g01551093
Move throttle control switch (6) to the LOW IDLE position. Hold the switch in this position for less than 1 second.
After the engine reaches low idle, move engine start switch (7) to the OFF position.
Move engine start switch (7) to the ON position. Do not start the engine.
Illustration 5 g01551654
Press home key (8) .
Illustration 6 g01554473
Press down key (9) until "Service" is highlighted on the display screen.
Press OK key (10) .
Illustration 7 g01554475
Press down key (9) until "Calibrations" is highlighted on the display screen.
Press OK key (10) .
Illustration 8 g01554493
Press down key (9) until "Station Propel Lvr" is highlighted on the display screen.
Press OK key (10) .
Illustration 9 g01554497
Press OK key (10) in order to begin the calibration.
Illustration 10 g01554513
Press OK key (10) .
Illustration 11 g01554515
Move propel lever (3) to the NEUTRAL position.
Press OK key (10) .
Illustration 12 g01554516
The display should now read "CALIBRATION COMPLETE". Push key (12) back in order to return to the calibration screen.
Push home key (8) in order to exit the calibration screen.
Move engine start switch (7) to the OFF position.