ALTERNATOR GP- 5479180 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Start By:
Remove Electronic Control Module.
Illustration 1 g06225753
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct procedure.
Illustration 2 g06237342
Illustration 3 g06237344
Remove gasket.
Note: The bolts are of different lengths. Note the position of the different bolts.
Illustration 4 g06237346Installation Procedure
Install engine oil cooler in the reverse order of removal.
Illustration 5 g06237347
Illustration 6 g06237351