ALTERNATOR GP 5493384 - Caterpillar

2N2385 24V or 32V
Current pull-in windings at 9V ... 5.5 to 6.3 ACurrent pull-in windings at 20 to 24V ... 12.2 to 16.8 ACurrent hold-in windings at 20 to 24V ... .45 A(1) Distance between shaft and plate * ... 24.4 mm (.96 in)(2) Distance of Plunger travel [start with dimension of 11.2 mm (.44 in) at front edge of plate (opposite spring side) to mounting surface on solenoid] ... 15.7 mm (.62 in)(3) Torque for shaft nut ... 24 7 N m (18 5 lb ft)(4) Torque for terminal nuts ... 1.6 0.3 N m (14 3 lb in)*On engine a test can show need for more adjustment. Hold-in test on engine must take less the 2 A. 9G111 24V or 32V
Coil resistance at 25°C (77°F) ... 3.3 to 4.1 ohms(1) Distance between shaft and plate: * 6N4241 Shaft ... 24.4 mm (.96 in)(2) Distance of plunger travel [start with dimension of 11.2 mm (.44 in) at front edge of plate (opposite spring side) to mounting surface on solenoid] ... 15.0 to 16.8 mm (.59 to .66 in)(3) Torque for shaft nut ... 24 7 N m (18 5 lb ft)(4) Torque for terminal nuts ... 1.6 0.3 N m (14 3 lb in)*On engine a test can show need for more adjustment. Hold-in test on engine must take less the 2 A. The solenoid must be activated to shut-off the engine. The maximum activated time is 2.5 minutes. 8N6095 24 VDC
Voltage rating 24VCoil resistance at 25°C (77°F) ... 3.33 to 4.07 ohms(1) Tighten nut to a torque of ... 24 7 N m (18 5 lb ft)(2) Distance between shaft and plate ... 24.38 0.50 mm (.96 .02 in) 6T4122 24 VDC
Voltage rating 24VCoil resistance at 25°C (77°F) ... 5.12 0.26 ohmsEnergized to shutoffDuty-intermittent, 3.0 minutes maximum "ON".