ALTERNATOR GP 5525932 - Caterpillar

1. Remove two bolts (4) and flap (3). Remove ten bolts (1) and panel (2). 2. Mark and remove six hydraulic lines (5). 3. Remove two bolts (6) and handle assembly (7). Remove two bolts (8) and outrigger control valve (9). The following steps are to install the outrigger control valve.4. Position valve in seat and install two bolts (8) to secure valve (9).5. Install handle assembly (7) with two bolts (6).6. Connect six hydraulic lined (5).7. Position panel (2) and secure with ten bolts (1). Position flap (3) and install two bolts (4).Disassemble And Assemble Outrigger Control Valve
Start By:a. remove outrigger control valve 1. Remove six hydraulic fittings (1). Replace "O"-ring seals if needed. 2. Remove four plunger assemblies consisting of: retainer (2), plunger (3), spring (4), pin (5), clip (6), retainer (7), spring (8), plunger (9) and spring (10). Replace "O"-ring seals as necessary. 3. Remove "O"-ring seal (11) and bolt (12). 4. Remove two "O"-ring seals (13) and (14). The following steps are for the assembly of the outrigger control valve.5. Install two seals (13) and (14).6. Install bolt (14) and seal (11).7. Install four plunger assemblies consisting of: spring (10), plunger (9), spring (8), retainer (7), clip (6), pin (5), spring (4), plunger (3) and retainer (2).8. Install six hydraulic fittings (1).End By:a. install outrigger control valve