ALTERNATOR-YM 5693393 - Caterpillar

Introduction
Do not perform any procedure that is outlined in this publication until you understand the information that is contained in this document.Harness Assemblies
The 217-0114 Adapter Cable As must be used with the 217-0113 Wiring Harness to flash software or to troubleshoot problems on Caterpillar engine Electronic Control Modules (ECMs).
Illustration 1 g02730540
(1) 217-0114 Adapter Cable As (2) 328-2292 Harness
Illustration 2 g02733638
(3) 217-0113 Wiring Harness The 217-0114 Adapter Cable As has been replaced by the 328-2292 Harness . Note: The 328-2292 Harness has additional protections to eliminate the risk of damaging non-engine ECMs. This protection only prevents damage to CAT non-engine ECMs and will not allow 328-2292 to work on these ECMs. Refer to Table 1.
Table 1
Part Number     Part Name     ECM Application    
224-4899     Harness     CAT/Perkins Engines and Challenger ECMs    
277-4734     Harness     Perkins Engines    
317-2652     Control Harness As     CAT Implement and Transmission ECMs    The 217-0114 Adapter Cable As and the 328-2292 Harness replaced the 167-9225 Harness .Note: The 167-9225 Harness and the 217-0114 Adapter Cable As change level 00 and 01 may damage the internal circuitry of non-engine ECMs when the connected to a 12VDC or 24VDC power supply. These harnesses should ONLY be used to service Caterpillar engine ECMs. For questions, contact the Dealer Service Tools Hotline at 1-800-542-8665 (US) or, 1-309-675-6277 (worldwide).