ALTERNATOR-YM 5693437 - Caterpillar

Use only work tools that are recommended by Caterpillar. The use of work tools that are not recommended by Caterpillar could damage your machine. Consult your Cat dealer for information on recommended work tools.
The following work tools have been approved by Caterpillar. Refer to the owner manual and the service manual for each work tool for proper operation, maintenance, and servicing of the work tools.Using work tools of other manufactures, or work tools which have been released for other excavators, can reduce the machines output and stability considerably, and can also damage the machine and cause injuries to the operator or other personnel.Always compare the weight of the work tool and its maximum payload with the indications in the lift capacity table. Never exceed the maximum payload stated in the lift capacity table.
Table 1
Caterpillar Approved Work Tools
Quick Coupler Manual Pin Grabber
Manual CW05
Manual CW05 Hook
Hydraulic CW05
Hydraulic CW05 Hook
Thumb Hydraulic Thumb
Hammer H45D
Mud Buckets 388-9662
Compaction Wheel DC-12 SKH
DC-18 SKH
DC-24 SKH
Buckets (1)
(1) Refer to Operation and Maintenance, "Boom/Stick/Bucket Combinations" for more information.The use of hammers shortens the life of hydraulic oil. If a hammer is used, the following measures should be taken:
Table 2
Application Hydraulic Oil Hydraulic System Oil Filter
Normal Work (Excavation Work) Replace the first time after 500 service hours, then every 1000 service hours Replace the first time after 50 service hours, then every 500 service hours
Percentage of Hammer Work 20% Every 800 service hours 300 service hours
40% Every 400 Service hours
60% Every 300 service hours 100 service hours
Over 80% Every 200 service hours This list was completed at the time of publication. There may be additional work tools that have been approved since that time. Consult your Cat dealer for an updated list of approved work tools.