ALTERNATOR GROUP 6L2224 - Caterpillar

Transmission
Illustration 2 g03713597
Transmission
Transmission containing input gears, output gears, and clutch groups.Torque Converter and Pump Drive Gear
Illustration 3 g03713847
Torque converter
The transmission case houses the torque converter that drives an idler gear that transfers power to the steering, implement, and transmission oil pumps.Valves (Control) and Sensors (Speed)
Illustration 4 g03713864
(1) Transmission output speed sensor (2)
(2) Transmission output speed sensor (1)
(3) Intermediate speed sensor
(4) Torque converter output speed sensor
(5) Electronic main relief valve
(6) Torque converter lock-up clutch (CL 7)
(7) REV clutch (CL 3)
(8) Second clutch (CL 4)
(9) Third clutch (CL 5)
(10) First clutch (CL 6)
(11) FWD HI (CL 2)
(12) FWD LO (CL 1)Oil Pump (Transmission)
Illustration 5 g03713879
Oil pump (transmission)
Oil pump for the transmission is attached to the pump (implement)(steering).Oil Filter (Transmission)
Illustration 6 g03713881
Oil filter
The oil filter for the transmission is on the right side of the machine below the platform in the hydraulic service center.Case (output)(gears)
Illustration 7 g03713883
Case (output)(gear)
The case (output)(gear) is attached to the transmission. The case (output)(gear) houses gearing that transfers power from the transmission to shaft (output).Screen (Magnetic)
Illustration 8 g03713880
Screen (magnetic)
The screen (magnetic) for the transmission oil is on the lower right side of the transmission case (output) (gears).Axles
Illustration 9 g03713897
Rear axle (oscillating)
Rear axle (oscillating) located under engine and transmission and attached to machine frame.
Illustration 10 g03713898
Front axle
Front axle located under loader arms and attached to machine frame.Cooler (axle) (If Equipped)
Cooler (axle) is in the differential housing of the axle assembly. Oil flows from the hydraulic cooler to a heat exchanger in the differential of each of the axle assemblies.
Illustration 11 g03714410
Cooler (axle) is located in the differential housing of the axle assembly.
Cooler (transmission oil)
Illustration 12 g03714559
Oil cooler
The cooler (oil) (transmission) is at the rear of the machine attached to the fuel tank.