ALTERNATOR GP-CHARGING 6N4218 - Caterpillar

Hot Coolant Under Pressure (9)This warning message is located behind the operator compartment.
g01371640
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.
No Clearance (10)This warning message is located on the fenders on both sides of the machine.
g01053243
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Body Prop (11)This warning message is located on both sides of the rear frame.
g01430347
Install dump body prop before working under a raised dump body to prevent it from falling which could result in personal injury or death.
Proper Connections for Jump Start Cables (12)This warning message is located on the front side of the hood on both sides of the machine.
g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Prop for the Cab (13)This warning message is located on the manual hand pump for tilting the cab.
g01430342
Install cab prop pin before working under raised cab to prevent it from falling which could result in injury or death.
Product Link (14)If the machine is equipped with Product Link, this warning message is located in the cab.
g01370917
This machine is equipped with a Caterpillar Product Link communication device which should be deactivated in or near a blasting zone in compliance with applicable legal requirements. Failure to do so could cause interference with blasting operations resulting in serious injury or death.
ROPS Certification (15)This warning message is located on the back of the cab.
g01131392
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.