ALTERNATOR AND MOUNTING GROUP 6N7138 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the engine oil into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g01123595
Remove bolts (1) that hold the connector for the engine oil pump to engine oil pan (2).
Illustration 2 g01123597
Remove bolts (3) that connect engine oil pan (2) to the cylinder block.
Illustration 3 g01123599
Improper lift rigging can allow unit to tumble causing injury and damage.
Attach a suitable lifting device to the engine lifting eyes. The weight of the 3516C Engine is approximately 9100 kg (20000 lb). The weight of the engine oil pan is approximately 409 kg (900 lb).
Lift the engine from the engine oil pan.
Illustration 4 g01123600
Remove oil pan gasket (4) from the engine oil pan. Remove O-ring seal (5). Remove bolts (6). Remove flange (7) from the engine oil pan. Remove seal (8) from the flange.