7N8943 ALTERNATOR GP-CHARGING Caterpillar parts
225, 225D, 227, 229
Rating:
Alternative (cross code) number:
CA7N8943
7N-8943
7N8943
CA7N8943
7N-8943
7N8943
Weight: 0.07 pounds 0 kg.
EXCAVATOR, LOGGER,
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01342429
Typical example
Disconnect the breather hose from the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove".
If the engine is equipped with a cover over the fuel system this will need to be removed.
Remove bolts (1) from valve mechanism cover (2).
Remove valve mechanism cover (2) from the valve mechanism cover base.
Remove joint (3) from valve mechanism cover (2).
If necessary, remove the separator for the crankcase breather from the valve mechanism cover base. Refer to Disassembly and Assembly, "Crankcase Breather - Remove". Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean all mating surfaces of the valve mechanism cover. Clean the mating surfaces of the valve mechanism cover base.
If necessary, install the separator for the crankcase breather to valve mechanism cover (2). Refer to Disassembly and Assembly, "Crankcase Breather - Install".
Illustration 2 g01342429
Typical example
Install a new joint (3) to valve mechanism cover (2). Note: Ensure that the joint is fully seated into the groove of the valve mechanism cover.
Illustration 3 g01342430
Ensure that harness assemblies (5) are not in contact with the rocker arms of the valve mechanism cover base. Position valve mechanism cover (2) onto valve mechanism cover base (4). Ensure that harness assemblies (5) are not trapped during the assembly procedure. Install bolts (1).
Illustration 4 g01342431
Tighten the bolts in the numerical sequence that is shown in Illustration 4. Tighten the bolts to a torque of 9 N m (79 lb in).
Connect the breather hose to the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Install".
If the engine is equipped with a cover over the fuel system this will need to be Installed.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01342429
Typical example
Disconnect the breather hose from the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Remove".
If the engine is equipped with a cover over the fuel system this will need to be removed.
Remove bolts (1) from valve mechanism cover (2).
Remove valve mechanism cover (2) from the valve mechanism cover base.
Remove joint (3) from valve mechanism cover (2).
If necessary, remove the separator for the crankcase breather from the valve mechanism cover base. Refer to Disassembly and Assembly, "Crankcase Breather - Remove". Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean all mating surfaces of the valve mechanism cover. Clean the mating surfaces of the valve mechanism cover base.
If necessary, install the separator for the crankcase breather to valve mechanism cover (2). Refer to Disassembly and Assembly, "Crankcase Breather - Install".
Illustration 2 g01342429
Typical example
Install a new joint (3) to valve mechanism cover (2). Note: Ensure that the joint is fully seated into the groove of the valve mechanism cover.
Illustration 3 g01342430
Ensure that harness assemblies (5) are not in contact with the rocker arms of the valve mechanism cover base. Position valve mechanism cover (2) onto valve mechanism cover base (4). Ensure that harness assemblies (5) are not trapped during the assembly procedure. Install bolts (1).
Illustration 4 g01342431
Tighten the bolts in the numerical sequence that is shown in Illustration 4. Tighten the bolts to a torque of 9 N m (79 lb in).
Connect the breather hose to the separator for the crankcase breather. Refer to Disassembly and Assembly, "Crankcase Breather - Install".
If the engine is equipped with a cover over the fuel system this will need to be Installed.
Caterpillar SIS machinery equipment:
Caterpillar SIS
225 EXCAVATOR 51U02034-02831 (MACHINE) POWERED BY 3208 ENGINE »
7N-8943
ALTERNATOR GP-CHARGING
225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE »
7N-8943
ALTERNATOR GP-CHARGING
227 LOGGER 10W00001-UP (MACHINE) POWERED BY 3208 ENGINE »
7N-8943
ALTERNATOR GP-CHARGING
225B LC 229 EXCAVATORS 1GF00001-UP (MACHINE) POWERED BY 3208 ENGINE »
7N-8943
ALTERNATOR GP-CHARGING
225D EXCAVATOR 2SJ00001-UP (MACHINE) POWERED BY 3208 ENGINE »
7N-8943
ALTERNATOR GP-CHARGING
Parts alternator Caterpillar catalog:
120, 120G, 12F, 12G, 130G, 140, 140G, 14E, 14G, 16, 160G, 16G, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3114, 3116, 3208, 325 L, 330, 330 F...
120G, 120H, 120H NA, 12G, 12H, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H NA, 14G, 14H NA, 160G, 160H, 160H NA, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, 235C, 235D, ...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3114, 3116, 3208, 325 L, 330, 330 FM L, 330 L, 3304, 3306, 3306B...
120G, 12G, 130G, 140G, 14G, 215, 225, 227, 235, 245, 3208, 3304, 3306, 3406, 3408, 3412, 518, 528, 561D, 571G, 572G, 583K, 594H, 613B, 621B, 621R, 623B, 627B, 631D, 633D, 637D, 639D, 641B, 657B, 814B,...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3114, 3116, 3208, 325 L, 330, 330 FM L, 330 L, 3304, 3306, 3306B...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215D, 219D, 225D, 229D, 231D, 235C, 235D, 245B, 245D, 3114, 3116, 3208, 325 L, 330, 330 FM L, 330 L, 3304, 3306, 3306B, 3412, 350, 375, 578, 613C II, 615C, 621E,...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 3114, 3116, 3208, 330 L, 3304, 3306, 3306B, 3412, 375, 561D, 571...
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 215D, 219D, 225D, 229D...
120G, 120H, 120H NA, 12G, 12H, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H NA, 140K, 14G, 14H NA, 160G, 160H, 160H NA, 160K, 215, 215B, 215C, 215D, 219D, 225, 225D, 227, 229, 229D, 231D, 235, 235B, ...
8N1067
ALTERNATOR GP-CHARGING
594H, D9H
594H, D9H
6N4218
ALTERNATOR GP-CHARGING
824C, 825C, 826C, 980C, 980F
824C, 825C, 826C, 980C, 980F
4N6559
ALTERNATOR GP-CHARGING
3304, 3306
3304, 3306