ALTERNATOR A 8L9829 - Caterpillar

Illustration 2 g03889440
Table 2
Item    Qty    Part    Specification Description    
7     1     133-2424 Shim     As required, use the shim of thickness
0.5 mm (0.02 inch) to adjust maximum lateral clearance of
0.8 mm (0.03 inch).    
8     1     197-7784 Pin As     Diameter is
99.950 0.025 mm (3.9350 0.0010 inch).    
9     2     197-7786 Bushing     Bore before assembly is
90.27 0.02 mm (3.554 0.001 inch).
Installation depth is
9.5 0.5 mm (0.37 0.02 inch).    
10     1     093-0090 Shim     As required, use the shim of thickness
1.0 mm (0.04 inch) to adjust maximum lateral clearance of
0.8 mm (0.03 inch).    
11     1     241-3955 Pin As     Diameter is
69.950 0.025 mm (2.7539 0.0010 inch).    
12     1     133-2427 Shim     As required, use the shim of thickness
0.5 mm (0.02 inch) to adjust maximum lateral clearance of
0.8 mm (0.03 inch).    
13     1     093-0086 Shim     As required, use the shim of thickness
1.0 mm (0.04 inch) to adjust maximum lateral clearance of
0.8 mm (0.03 inch).    
14     2     7X-4803 Lip Type Seal     Lubricate the sealing lightly with the lubricant that is being sealed.
Seal-lip should be faced outwards to prevent the passage of lubricant.    
15     2     7Y-2396 Bushing     Bore before assembly is
90.27 0.02 mm (3.554 0.001 inch).
Installation depth is
9.5 0.5 mm (0.37 0.02 inch).    
16     1     133-2425 Shim     As required, use the shim of thickness
0.5 mm (0.02 inch) to adjust maximum lateral clearance of
0.8 mm (0.03 inch).    
17     1     206-9499 Pin     Diameter is
89.950 0.025 mm (3.5413 0.0010 inch).    
18     1     197-7788 Pin As     Diameter is
79.950 0.025 mm (3.1476 0.0010 inch).    
19     1     7Y-2498 Shim     As required, use the shim of thickness
1.6 mm (0.06 inch) to adjust maximum lateral clearance of
0.8 mm (0.03 inch).    
20     1     7Y-2497 Shim     As required, use the shim of thickness
1.6 mm (0.06 inch) to adjust the maximum lateral clearance of
1.6 mm (0.06 inch) to minimum lateral clearance of
0.5 mm (0.02 inch).    
21     1     093-0084 Shim     As required, use the shim of thickness
1.0 mm (0.04 inch) to adjust the maximum lateral clearance of
1.6 mm (0.06 inch) to minimum lateral clearance of
0.5 mm (0.02 inch).    
22     3     8T-4956 Bolt     Torque to
100 20 N m (74 15 lb ft).