AMPLIFIER 5294897 - Caterpillar

Configurable Events
The beeper can be configured for any of the following events:Warning Messages - This event occurs when a warning message clears automatically. This event occurs when a warning message appears.GPS Accuracy - This event occurs when the level of the accuracy of the GPS signals changes.Avoidance Zones - This event occurs when the machine is within the warning distance of an Avoidance Zone. This event occurs if the "No Avoid" message is displayed. The beeper sounds in a continuous pattern when the machine is within the Avoidance Zone. Note: The beeper cannot be disabled for Avoidance Zones.Key/Switch Beeps - This event occurs when a key or a switch is pressed.Beeper Patterns
Table 1 lists the pattern of sounds that are generated by the beeper. The beeper will sound for all of the events that are listed. This is the default operation. However, some events may be turned off by your on-site manager.Note: Additional patterns are available for other types of machines. The additional patterns do not apply to compactors.
Table 1
Event     Trigger     Pattern    
Inside Avoidance Zone     The machine is inside an avoidance zone.     Continuous
200 msec on
200 msec off
400 msec on
200 msec off    
Approach Avoidance Zone     The machine is within the warning distance of an avoidance zone.     Only once
200 msec on
200 msec off
400 msec on    
No Avoid     The "No Avoid" message appears.     Only once:
200 msec on    
Warning Message Appears     A warning message appears.     Only once
200 msec on
200 msec off
200 msec on    
Warning Message Disappears     A warning message automatically disappears.     Only once:
200 msec on    
GPS Accuracy     The level of GPS accuracy changes.     Only once
200 msec on    
Key/Switch Beeps     A key or a switch is pressed.     Only once
200 msec on    Beeper Options Dialog
Illustration 1 shows the physical layout of the AccuGrade Display. Refer to this Illustration for the location of the keys that are discussed within this section.
Illustration 1 g01290651
(1) LCD screen (2) Soft key labels (3) Soft keys (4) Next key (5) Escape key (6) Zoom-in key (7) Data card slot access door (8) Menu key (9) Arrow keys (10) OK key (11) Zoom-out key (12) Power keyPerform the following steps in order to access the "Beeper Options" dialog.
From any guidance screen, press the Menu key (8). The "Setup Menu - Configuration" screen appears.
Scroll to the "Beeper" option. Use the arrow keys (9) .
Illustration 2 g01381333
"Beeper Options" dialog (13) "Toggle Selection" soft key (14) "Test" soft key
Press the OK key (10). The "Beeper Options" dialog appears. The dialog shows the currently configured audible alerts. Table 2 defines the condition of the event.
Table 2
Event Status    Indication    
Disabled     Red X in the check box    
Enabled     Green check mark in the check box    
Cannot be disabled     Grayed out check mark in the check box    
Scroll through the events. Use the arrow keys (9) .
Press the "Toggle Selection" soft key (13) in order