ANCHOR-BRAKE 3317514 - Caterpillar

Position cover (31) and install bolts (30) . Connect harness assemblies (29) .
Illustration 13 g01119557
Position console assembly (28) . Install bolts (27) .
Illustration 14 g01119554
Install cover (26) .
Illustration 15 g01119547
Position mount (25) and washer (24) . Install bolt (23) . Tighten bolt (23) to a torque of 900 100 N m (664 74 lb ft).
Illustration 16 g01119545
Position cover (22) and install bolts (21) .
Illustration 17 g01119543
Illustration 18 g01119521
Position console (20) and install bolts (19) . Install ducts (18) and vent assemblies (17) .
Illustration 19 g01119397
Position plate (16) and install bolts (15) . Install filter (14) .
Illustration 20 g01119367
Position box assembly (13) and install nuts (12) .
Illustration 21 g01119365
Close door assembly (11) .
Illustration 22 g01119357
Connect hose assemblies (10) and hoses (9) .
Illustration 23 g01119352
Position cover assembly (7) and install bolts (8) .
Illustration 24 g01119351
Connect hoses (6) and harness assembly (5) .
Illustration 25 g01119344
Position plate (2) . Install bolts (3) and (4) .
Illustration 26 g01119342
Close door assembly (1) .
Turn the battery disconnect switch to the ON position.
Charge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the procedure. Refer to Dealer Service Tool Catalog, NENG2500, "Air Conditioning Tools" for the correct tools.End By:
Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Install the rollover protective structure. Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install".