ANCHOR-BRAKE 3345021 - Caterpillar

Illustration 1 g03818414
Right side view
Table 1
Specification for 290-9213 Hoe Stick Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 1 4I-4811 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
2 1 4I-4809 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
3 2 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
4 2 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
5 2 166-1494 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
Install the following bushing in the bore so that the part number of the bushing is facing outward.
6 The bushing (6) is one of the following part numbers:
2 357-5709 Bushing Bore is 90.345 0.030 mm (3.5569 0.0012 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
2 228-5615 Bushing Bore is 90.21 0.04 mm (3.552 0.002 inch).
Installation depth of the bushing is 9.5 0.8 mm (0.37 0.03 inch).
7 2 229-1096 Bushing Bore is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 2 240-2913 Bushing Bore is 80.20 0.04 mm (3.157 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).