ANGLE 0314445 - Caterpillar

Install shaft (38) in order to attach toggle assembly (39) to scissor assembly (20). Tighten the two nuts for shaft (38) to a torque of 15 3 N m (11 2 lb ft).
Illustration 5 g00897049
Install shaft assemblies (37) in order to attach tether straps (36) and scissor assembly (20) to housing assembly (23). Tighten the nuts on shaft assemblies (37) to a torque of 20 5 N m (15 4 lb ft). Install blocking in order to prevent scissor assembly (20) from falling.
Illustration 6 g00897002
Illustration 7 g00897000
Install screw (35) in order to attach housing assembly (23) to spring assembly (34) .
Install shaft (32) in order to attach toggle assembly (33) to scissor assembly (20). Tighten the two nuts for shaft (32) to a torque of 15 3 N m (11 2 lb ft).
Illustration 8 g00896969
Illustration 9 g00896968
Illustration 10 g00896966
Install bearings (28) to shock absorber (22) .
Install bolt (25) and clamp (24) in order to attach bracket (26) and cable assembly (11) to shock absorber (22) .
Install bolts (21) in order to attach shock absorber (22) to scissor assembly (20) and housing assembly (23). Remove the blocking.Note: Illustration 8 shows the location of lockwasher (27), bearings (28), washers (29), nut (30), and locknut (31) .
Illustration 11 g00896887
Connect harness assemblies (18) and hose assembly (19) to air valve (8) .
Illustration 12 g00896886
Position air valve (8) to upper housing assembly (17). Position upper housing assembly (17) to the seat.
Illustration 13 g00896878
Install cable strap (16) in order to secure harness assemblies (18) to upper housing assembly (17) .
Illustration 14 g00896839
Install shaft assemblies (15). Tighten the nuts for shaft assemblies (15) to a torque of 20 5 N m (15 4 lb ft).
Illustration 15 g00896818
Install bolts (9) in order to attach bracket (10) .
Install bolt (13) in order to attach lever (14) to bracket (10) .
Install bolt (12) in order to attach cable assembly (11) to lever (14) .
Illustration 16 g00896809
Position plate (5) to the seat. Install lockwasher (6) and nut (7) in order to secure air valve (8) to the seat. Tighten the setscrew in adjustment knob (1) in order to secure adjustment knob (1) to air valve (8) .
Install bolts (3) in order to attach indicator (4) to the seat.
Illustration 17 g00896756
Install boot (2) to the seat.