ANGLE AS 2453206 - Caterpillar

New Pump Configuration
A new pump configuration was added to the software. The new software will allow different settings of the torque limiter on the hydraulic pump. The new pump configuration will appear in Cat Electronic Technician (Cat ET) for the following serial numbers: PRA, PHC, RLN and SCD. The new number will default to one of the following configurations:
1035 for the 267-2755 Piston Pump Gp
1036 for the 340-6184 Piston Pump Gp Note: Certain machines that are equipped with the 267-2755 Piston Pump Gp may be adjusted. Refer to Special Instruction, REHS5202 for detailed instructions.
Illustration 1 g01960381
"Caterpillar Electronic Technician 2009A" example (1) "Pump Configuration"
Illustration 2 g01960382
"Caterpillar Electronic Technician 2009B" example (2) "Implement Pump Configuration Code"The configuration for the pump will be located in the "Configuration Group 1" in version 2009A of Cat ET. Refer to Illustration 1. For 2009B and later versions of Cat ET, the configuration for the pump will be located in the "Hydraulics Configurations" group. Refer to Illustration 2.The pump configuration option applies to the following prefixes: PRA, PHC, RLN and SCD.Implement Lockout
Illustration 3 g01960498
"Caterpillar Electronic Technician 2009A" example (3) Status of implement lockout function
Illustration 4 g01960495
"Caterpillar Electronic Technician 2009B" exampleThe implement lockout function applies to the ELB serial number only. The configurable lockout function may not be installed. This depends on the hydraulic valves that are installed. The configuration for the implement lockout will be located in the "Configuration Group 1" in version 2009A of Cat ET. Refer to Illustration 3. Also, the configuration for the implement lockout will be located in the "Hydraulics Configurations" group for 2009B and later versions of Cat ET. Refer to Illustration 4.Note: The number 16 indicates that the lockout function is "Installed". The number 17 indicates that the lockout function is "Not Installed".The option for the implement lockout function applies to the following prefix:
ELBNew Dimensions
The dimensions in the Accugrade software for the 120-9286 Plate were improved. The new dimensions apply to the following serial number prefixes: SHA, HLS, KMW, EAT, DDT, BWC, PRA, PHC, RLN and SCD. The "10 to E" dimension was changed from 414 to 58. The "8 to E" dimension was changed from 58 to 414. The new dimensions will improve digging depth accuracy.The new dimensions apply to machines that are equipped with AccuGrade.