ANGLE 2P0911 - Caterpillar

Lubrication System
The capacity of the lubrication system includes the capacity of the oil filters that are installed at the factory.Auxiliary oil filter systems (if equipped) will require more oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.For the recommended oil, see this Operation and Maintenance Manual, "Fluid Recommendations" topic.Engine Lubrication Refill Capacities
Table 1
Approximate Refill Capacities for 3500C Lubrication Systems
Engine Sump Configuration Capacity
3512C Deep Sump 625 L (165 US gal)
3516C Deep Sump 807 L (213 US gal) Cooling System
To maintain the cooling system properly, the total capacity of the cooling system must be determined. The capacity of the total cooling system will vary between individual installations. The external system can include the following components: expansion tank, radiator, and piping. Refer to the specifications that are provided by the OEM. Record the total cooling system capacity in the appropriate Table.For the recommended coolant, see this Operation and Maintenance Manual, "Fluid Recommendations" topic.Engine Cooling System Refill Capacities
Table 2
Approximate Refill Capacities for the 3500C Engine Cooling Systems with Separate Circuit Aftercooling
Compartment or System 3512C 3516C
Engine plus jacket water system 260 L (69 US gal) 305 L (81 US gal)
Engine plus jacket water system plus separate circuit aftercooler 291 L (77 US gal) 352 L (93 US gal)