ANGLE 3436286 - Caterpillar

Illustration 1 g06111963
205-0844 Hydraulic Tank Gp
(1) 377-9933 Tube As
(2) 378-3447 Tube As
Illustration 2 g06111964
195-6393 Hydraulic Tank Gp
(3) 439-8426 Tube As
(4) 439-8429 Tube As
Table 1
Part List
Item New Part Number Part Name Former Part Number
1 377-9933 Tube As 212-6156
209-6410
2 378-3447 Tube As 212-6155
209-6410
3 439-8426 Tube As 174-3654
195-5843
4 439-8429 Tube As 174-3653
195-5843 New 377-9933 Tube As (1) replaces the former 212-6156 Tube As and 209-6410 Tube As in 205-0844 Hydraulic Tank Gp.New 378-3447 Tube As (2) replaces the former 212-6155 Tube As and 209-6410 Tube As in 205-0844 Hydraulic Tank Gp.Note: New 1H-0474 O-Ring Seal is used with 377-9933 Tube As (1) and 378-3447 Tube As (2).New 377-9933 Tube As (1) and 378-3447 Tube As (2) are adaptable to machines :
JSM1-UP
5YW258-UPNew 439-8426 Tube As (3) replaces the former 174-3654 Tube As and 195-5843 Tube As in 195-6393 Hydraulic Tank Gp.New 439-8429 Tube As (4) replaces the former 174-3653 Tube As and 195-5843 Tube As in 195-6393 Hydraulic Tank Gp.Note: New 1H-0474 O-Ring Seal is used with 439-8426 Tube As (3) and 439-8429 Tube As (4).New 439-8426 Tube As and 439-8429 Tube As are adaptable to the machines :
5YW1-257Installation Instructions
Follow the installation procedure given below when assembling each tube assembly:
Position and orient the new tube assemblies on hydraulic tank group. Refer to Illustration 1 or 2.
Install four bottom bolts to a minimal torque. Ensure that the slots are able to rotate and reduce stress on the tube by not completely tightening the bolts.
Inspect position of top flange. If there is a gap of greater than 6.35 mm (0.25 inch), use a 383-1184 Adapter as a shim and longer 161-7632 Self-Locking Bolt.
Install four top bolts to a minimal torque. Ensure that the slots are able to rotate and reduce stress on the tube by not completely tightening the bolts.
Tighten eight bolts to standard torque.