ANGLE 6U9522 - Caterpillar

ACTION REQUIRED
Unpin the cylinders from the 230-7096 angle blade. Remove paint from areas to be welded. Weld the wedge (WDG-0001) on back side of cylinder. Weld the short bushing to the top side and bottom side. Reconnect the cylinder with the 7x-0333 shear bolt.
Install the rubber bumpers onto the blade stop. Place the plow onto the face of moldboard. Weld the gussets and mounting plate for the third shoe in the center of the blade in alignment with the other shoes. Assemble and install the third shoe. Place the blade back in working position.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-72 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 8.0-hour job
$896 will be allowed for the non-Cat parts.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.