ANGLE 8E3599 - Caterpillar

8E3599 ANGLE Caterpillar parts D10N, D10R, D10T, D7R, D7R II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8E3599
8E-3599
8E3599

Weight: 66 pounds 29 kg.

Buy ANGLE 8E3599 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 8E3599:

TRACK-TYPE TRACTOR D10N D10R D10T D7R D7R II Caterpillar

Number on catalog scheme: 5

For full view, you need register

Information:

Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.
Illustration 1 g01296715
Open the engine access door (if equipped) on the left side of the machine.
Illustration 2 g01296735
Check the "ENGINE LOW IDLE" side of dipstick (1) while the engine is running. The oil should be at operating temperature. Maintain the oil level between "ADD" mark (A) and "FULL" mark (B). This is the only accurate way to check the oil level.Check the "ENGINE STOPPED" side of dipstick (2) while the engine is stopped. The oil should be cold. Maintain the oil level between "ADD" mark (C) and "FULL" mark (D). This method should be used as reference only, before the engine is started.Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be at "FULL" mark (B) on the "ENGINE LOW IDLE" side of dipstick (1) .
Remove the oil filler cap and add oil, if necessary.
Clean the oil filler cap and install the oil filler cap.
Close the engine access door (if equipped).