AVSPARE.COM
parts catalog

ANGLE 9C8527 - Caterpillar


9C8527 ANGLE Caterpillar parts 918F, 924F
Rating:
20
Alternative (cross code) number:
CA9C8527
9C-8527
9C8527
Caterpillar 9C8527 ANGLE
Weight: 0.85 pounds 0 kg.

Buy ANGLE 9C8527 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9C8527:

WHEEL LOADER  918F   924F   Caterpillar
Number on catalog scheme: 21
  For full view, you need register

Information:


Illustration 1 g00652197
Set the pedal stop (5) to the minimum position.
Loosen the nuts (7) on the adjusting rod (8). Adjust the adjusting rod until the length (A) is 157 2 mm (6.2 0.08 inches). Adjust the rod length (A) by rotating the ends (6) of the adjusting rod.
Note the position of the governor arm (1) when the pedal (4) is fully depressed. Note the position of the governor arm when the pedal is not depressed.
Adjust the low idle position so the governor arm returns beyond the low idle position. The governor arm should rest on the overrun spring. Use the adjusting rod to set the low idle position. If the adjusting rod fails to provide enough adjustment, use the adjusting nuts (9) on the end of the cable (3) in the cab. The spring (2) should have a maximum of 1 mm (0.04 inches) of displacement.
When the pedal is fully depressed, the governor arm should overlap the spring stop 5 2 mm (0.2 0.08 inches). If the overrun is incorrect, adjust the pedal stop and repeat step 4.
Ensure that all nuts are tight. Start the engine. Control of the engine should be achieved within 7.5 2.5 mm (0.3 0.1 inches) of pedal travel.

Caterpillar parts catalog:

Caterpillar parts catalog
924F Wheel Loader 6MN00001-UP (MACHINE) POWERED BY 3114 Engine
924F Wheel Loader 5NN00001-UP (MACHINE) POWERED BY 3114 Engine
924F Wheel Loader 4YN00001-UP (MACHINE) POWERED BY 3114 Engine


Parts angle Caterpillar catalog:

8R9341 ANGLE AS
918F, 924F, IT18F, IT24F
1268288 ANGLE
938F, 950F II, 960F, 966F, 966F II, 970F
8V7994 ANGLE
525B, 535B, 938F
1193111 ANGLE AS
914G, IT14G, IT14G2
1193101 ANGLE AS
914G, IT14G, IT14G2
1359930 ANGLE
924F, 924GZ, 928G, 938G, IT24F, IT28G, IT38G
4E3226 ANGLE
IT18F, IT24F
4E7540 ANGLE
918F, 924F, 924G, 924GZ, 924H, 924HZ, 928G, 928H, 928HZ, 930G, IT18F, IT24F, IT28G
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.