ARM-VALVE ROCKER 10R1707 - Caterpillar

(1) Assemble shaft even with the back of the bracket. Make an adjustment if necessary for track alignment.(2) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of oil on the surfaces of the metal seals that are in contact just before installation. Put lubricant on all other seals at assembly. Seal rings must be assembled square with the bore and the toric must not be bulged or twisted.(3) At assembly, put the machined face of plate against end of shaft.(4) Torque for bolts ... 47 9 N m (35 7 lb ft)(5) Put lubricant on seal surface of collar before assembly.(6) Torque for plug ... 170 20 N m (125 15 lb ft)