1263503 ARM-WINDOW WIPER Caterpillar parts
953C, 953D, 963C, 963D, 973C, 973D
Rating:
Alternative (cross code) number:
CA1263503
126-3503
1263503
CA1263503
126-3503
1263503
Weight: 2 pounds 1 kg.
TRACK LOADER,
This part in 2 request:
Show.
This information for suppliers only!
2022-10-31
2020-10-29
Number on catalog scheme:
4
For full view, you need register
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00570915
Place the lifter body (1) in a hydraulic press.
Apply engine oil to the internal bore of the lifter body (1) and the adapter bores (2). Press the adapter (2) into the body (1). The top of the adapter should be flush with the top of the body (1) after assembly.
Illustration 2 g00570916Note: Place shims between the lifter and the roller when the pin is installed. This is necessary in order to prevent the forks on the body from bending.
Place the roller (5) between the forks of the lifter (4). Place both parts in a press with the lockwire groove on the top side.
Install the wire in the pin (3) with equal excess on each side.
Lubricate the pin (3) with clean engine oil.
Align the wire with the groove on the fork of the lifter (4).
Press the pin (3) into the lifter (4) and the roller (5).
Install the pushrod insert in the lifter body (4).
Raise the temperature of the intake lifter body and raise the temperature of the exhaust lifter body to 177 °C (350 °F). Lower the temperature of the pins to −60 °C (−76 °F).
Always wear protective gloves when handling parts that have been heated.
Illustration 3 g00570917
Install a new guide spring (9) and guide spring (11) on the lifters. Note: If the guide springs were removed from the valve lifters, the guide springs must not be used again.
Illustration 4 g00626748
The roller is not installed on the valve lifter that is shown in the illustration.
Install the insert (13) in the body (14) with the lifter cup that faces outward. Install the new O-ring retainer (12) in order to hold the insert in place.
Immerse the following lifters in clean engine oil: (7), (8) and (10).
Install the valve lifter (7) and the valve lifter (10) in the original positions. Install the valve lifters so that the guide spring will be in the proper position. Note: Use large pliers in order to compress the guide springs (11) so that the valve lifter assemblies can be installed in the body of the valve guide (6).
Install the gas admission valve lifter (8). End By:
Install the valve lifter assembly.
Install the push rods.
Check the valve lash.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00570915
Place the lifter body (1) in a hydraulic press.
Apply engine oil to the internal bore of the lifter body (1) and the adapter bores (2). Press the adapter (2) into the body (1). The top of the adapter should be flush with the top of the body (1) after assembly.
Illustration 2 g00570916Note: Place shims between the lifter and the roller when the pin is installed. This is necessary in order to prevent the forks on the body from bending.
Place the roller (5) between the forks of the lifter (4). Place both parts in a press with the lockwire groove on the top side.
Install the wire in the pin (3) with equal excess on each side.
Lubricate the pin (3) with clean engine oil.
Align the wire with the groove on the fork of the lifter (4).
Press the pin (3) into the lifter (4) and the roller (5).
Install the pushrod insert in the lifter body (4).
Raise the temperature of the intake lifter body and raise the temperature of the exhaust lifter body to 177 °C (350 °F). Lower the temperature of the pins to −60 °C (−76 °F).
Always wear protective gloves when handling parts that have been heated.
Illustration 3 g00570917
Install a new guide spring (9) and guide spring (11) on the lifters. Note: If the guide springs were removed from the valve lifters, the guide springs must not be used again.
Illustration 4 g00626748
The roller is not installed on the valve lifter that is shown in the illustration.
Install the insert (13) in the body (14) with the lifter cup that faces outward. Install the new O-ring retainer (12) in order to hold the insert in place.
Immerse the following lifters in clean engine oil: (7), (8) and (10).
Install the valve lifter (7) and the valve lifter (10) in the original positions. Install the valve lifters so that the guide spring will be in the proper position. Note: Use large pliers in order to compress the guide springs (11) so that the valve lifter assemblies can be installed in the body of the valve guide (6).
Install the gas admission valve lifter (8). End By:
Install the valve lifter assembly.
Install the push rods.
Check the valve lash.
Caterpillar parts catalog:
Parts arm Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 214B, 224B, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 32...
120H, 120H ES, 120H NA, 135H NA, 30/30, 3114, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 924F, 928G...
2917981
ARM AS
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
2917984
ARM AS
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
2918005
ARM AS
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
2918012
ARM
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
2135168
ARM-INDICATOR
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
953D, 963D, 966H, 973D, 993K, D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, PL61
6V8100
ARM AS-WIPER
508, 518, 518C, 528B, 530B, 953B, 953C, 963B, 963C, 973, 973C, CP-433C, CP-563, CS-431C, CS-531C, CS-533C, CS-563C, CS-573C, CS-583, CS-583C
508, 518, 518C, 528B, 530B, 953B, 953C, 963B, 963C, 973, 973C, CP-433C, CP-563, CS-431C, CS-531C, CS-533C, CS-563C, CS-573C, CS-583, CS-583C
2163863
ARM AS-LIFT
973C
973C
583T, 587R, 587T, D10T, D10T2, D11T, D5N, D5R LGP, D6G2 LGP, D6G2 XL, D6N, D6N LGP, D6R, D6R II, D6R III, D6R STD, D6T, D6T LGP, D6T XL, D7G2, D7R, D7R II, D7R XR, D8R, D8T, D9T, PL83, PL87
D6H, D6H XL, D6H XR, D6R, D6R II, D6R III, D6T, D6T XL, D7H, D7R, D7R II, D8N, D8R, D8R II
7C9652
ARM AS-TIGHTENER
589, D9N
589, D9N
7C9653
ARM AS-TIGHTENER
589, D8L, D9L
589, D8L, D9L
2W5087
ARM AS-TIGHTENER
589, D9L
589, D9L
1526641
ARM AS-WINDOW WIPER
902, 906, 908, 924K, 930K, 938K, 950K, 953D, 962K, 963D, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 973D, 980K, 980K HLG, 980M, 982M
902, 906, 908, 924K, 930K, 938K, 950K, 953D, 962K, 963D, 966K, 966M, 966M XE, 972K, 972M, 972M XE, 973D, 980K, 980K HLG, 980M, 982M
2153296
ARM AS
627G, 637G, 973C, D6R, D6R II, D6R III, D6R STD, D6T, D7R XR
627G, 637G, 973C, D6R, D6R II, D6R III, D6R STD, D6T, D7R XR