ARM-REACTION 1924214 - Caterpillar

Keypad
Illustration 1 g06114967When the engine start switch is moved to the ON position, all LED indicators on the keypad will flash briefly.Note: The engine start switch does not need to be ON to supply power to the keypad
(1) Full - The upper indicator, the middle indicator, and the lower indicator will illuminate continuously when the corresponding fluid is at full level. When these indicators illuminate, stop the flow of fluid to the corresponding fast fill port.
(2) Normal - The middle indicator and the lower indicators will illuminate continuously when the corresponding fluid is at or above normal operating level.
(3) Add - The lower indicator will flash when the corresponding fluid is below normal operating level. When this indicator flashes, add the proper fluid for the corresponding system. (4) Indicator Test Button - There is a test button for the fluid level indicators on each system. To test the indicators, push and hold test button (4) for the desired system. While the button is depressed, the indicator for the corresponding system will flash once and then illuminate continuously if the indicators are working properly. Test the indicators before filling any system with the corresponding fast fill port.
(5) Differential and Final Drive Oil Level Indicator - The keypad has only ADD and NORMAL indicators for the differential and final drive oil. There is not a port for the differential and final drive oil in the fast fill service center. A FULL indicator is only present when the system fluid has a corresponding port in the fast fill service center.Ports
Illustration 2 g06114974
(6) Fast Fill Port for Autolube (If Equipped)
(7) Fast Fill Port for Engine Oil
(8) Fast Fill Port for Transmission/Torque Converter Oil
(9) Fast Fill Port for Hoist/Brake Oil
(10) Fast Fill Port for Steering Oil
(11) Fast Fill Port for Engine Coolant
(12) Fast Fill Port for Diesel Fuel