2318177 ARM & BEARING AS-LIFT Caterpillar parts
988G, 988H
Rating:
Alternative (cross code) number:
CA2318177
231-8177
2318177
CA2318177
231-8177
2318177
Weight: 7145 pounds 3240 kg.
WHEEL LOADER,
Information:
ACTION REQUIRED
1) Loosen the existing 231-9164 Quick Connector from the 200-4105 Connector Assembly.
2) Replace the 4K-1388 Seal-O-Ring which is part of the 200-4105 Connector Assembly.
3) Mount the same 231-9164 Quick Connector and tighten to a torque of 250 Nm.
4) Tighten the 2P-1293 Locknut to a torque of 91 Nm.
5) Repeat steps 1 thru 4 for the other side of the Actuator Clamshell Arrangement.
Image1
OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job for Group 1
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
100% 100% 0% 0% 0% 0%
This is a 0.5-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR RETIGHTENING THE 231-9164 QUICK CONNECTOR
MODELS INVOLVED - 319D AND 323D EXCAVATORS EQUIPPED WITH THE ACTUATOR CLAMSHELL ARRANGEMENT
Dear Caterpillar Product Owner:
The 231-9164 Quick Connector needs to be retightened on the products listed below. The existing 231-9164 Quick Connector can become loose due to an incorrect tightening torque during assembly. This can cause an unexpected hydraulic oil leak between the 231-9164 Quick Connector and the 200-4105 Connector Assembly. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
Please refer the dealer to their Service Letter dated 06Oct2008 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 06Oct2008 Service Letter
Caterpillar SIS machinery equipment:
Caterpillar SIS
988G Wheel Loader 2TW00001-UP (MACHINE) POWERED BY 3456 Engine »
231-8177
ARM & BEARING AS-LIFT
988G Wheel Loader BNH00001-UP (MACHINE) POWERED BY 3456 Engine »
231-8177
ARM & BEARING AS-LIFT
988H Wheel Loader BXY00001-UP (MACHINE) POWERED BY C18 Engine »
231-8177
ARM & BEARING AS-LIFT
988H Wheel Loader A7A00001-UP (MACHINE) POWERED BY C18 Engine »
231-8177
ARM & BEARING AS-LIFT
Caterpillar parts catalog:
Parts arm Caterpillar catalog:
2147634
ARM GP-WINDOW WIPER
621H, 623H, 627H, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G II, 980H, 988G, 98...
621H, 623H, 627H, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G II, 980H, 988G, 98...
2147635
ARM GP-WINDOW WIPER
554, 564, 574B, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 854G, 854K, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II,...
554, 564, 574B, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 854G, 854K, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II,...
2011049
ARM & BEARING AS-LIFT
988G, 988H
988G, 988H
1555787
ARM AS-WIPER
824G, 824G II, 825G, 825G II, 826G, 826G II, 834G, 836G, 844, 854G, 950G, 962G, 966G, 972G, 972G II, 980G, 980G II, 988G, 990 II, 992G, IT62G
824G, 824G II, 825G, 825G II, 826G, 826G II, 834G, 836G, 844, 854G, 950G, 962G, 966G, 972G, 972G II, 980G, 980G II, 988G, 990 II, 992G, IT62G
1555788
ARM AS-WIPER
824G, 824G II, 825G, 825G II, 826G, 826G II, 834G, 836G, 950G, 962G, 966G, 972G, 972G II, 980G, 980G II, 988G, IT62G
824G, 824G II, 825G, 825G II, 826G, 826G II, 834G, 836G, 950G, 962G, 966G, 972G, 972G II, 980G, 980G II, 988G, IT62G
1158205
ARM-FEEDBACK
834G, 988G
834G, 988G
3326679
ARM AS
834H, 836H, 988G, 988H
834H, 836H, 988G, 988H
3326900
ARM AS
834H, 836H, 988G, 988H
834H, 836H, 988G, 988H
2011049
ARM & BEARING AS-LIFT
988G, 988H
988G, 988H
1500806
ARM & BEARING AS-LIFT
938F, 938G, 938G II, IT38G II
938F, 938G, 938G II, IT38G II
2146937
ARM AS-LIFT
966G
966G
1598204
ARM & BEARING AS
962G, IT62G
962G, IT62G
1662638
ARM GP-PENDULUM
570, 570B
570, 570B
1662639
ARM GP-PENDULUM
550, 550B, 570, 570B
550, 550B, 570, 570B
1632999
ARM GP-PENDULUM
550, 550B, 570, 570B
550, 550B, 570, 570B