2343090 ARM AS-LIFT Caterpillar parts
980G II, 980H
Rating:
Alternative (cross code) number:
CA2343090
234-3090
2343090
CA2343090
234-3090
2343090
Weight: 4666 pounds 2116 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$54.88
30 Oct 2023
0.26[0.12] pounds
Amazon.com
Denso 234-3090 Oxygen Sensor
Denso Aluminum oxide trap, this extra layer helps to protect from silicone and lead poisoning || Stainless steel housing and porous Teflon filter all contribute to make a long life || Improved engine performance and greater fuel efficiency || Prevents premature sensor failure
Denso Aluminum oxide trap, this extra layer helps to protect from silicone and lead poisoning || Stainless steel housing and porous Teflon filter all contribute to make a long life || Improved engine performance and greater fuel efficiency || Prevents premature sensor failure
$54.88
26 Apr 2023
0.26[0.12] pounds
Amazon.com
Denso 234-3090 Oxygen Sensor
Denso Aluminum oxide trap, this extra layer helps to protect from silicone and lead poisoning || Stainless steel housing and porous Teflon filter all contribute to make a long life || Improved engine performance and greater fuel efficiency || Prevents premature sensor failure
Denso Aluminum oxide trap, this extra layer helps to protect from silicone and lead poisoning || Stainless steel housing and porous Teflon filter all contribute to make a long life || Improved engine performance and greater fuel efficiency || Prevents premature sensor failure
$78.98
17 Feb 2023
0.25[0.11] Pounds
US: EASTOVER AUTO S
Denso 234-3090 Oxygen Sensor by Denso
Denso Part Type: Oxygen Sensor || Manufactured By: Denso || Model Number: 234-3090 || Alt Model: 234-3090 || Alt MPN: 234-3090 || Product Weight: 0.25 lbs. || UPC: 042511130906 || Condition: New || Vehicle Specific Fitment || Ships from within the United States
Denso Part Type: Oxygen Sensor || Manufactured By: Denso || Model Number: 234-3090 || Alt Model: 234-3090 || Alt MPN: 234-3090 || Product Weight: 0.25 lbs. || UPC: 042511130906 || Condition: New || Vehicle Specific Fitment || Ships from within the United States
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the stick. Refer to Disassembly and Assembly, "Stick - Remove".
Remove the stick cylinder. Refer to Disassembly and Assembly, "Stick Cylinder - Remove".
Remove the boom cylinder. Refer to Disassembly and Assembly, "Boom Cylinder - Remove".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hoses. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00909431
Disconnect hose assemblies (1) .
Use a suitable lifting device in order to lift the boom evenly. The weight of the boom is approximately 390 kg (860 lb). Put tension on the lifting device.
Remove pin (3) .
Remove boom (2) .
Start By:
Remove the stick. Refer to Disassembly and Assembly, "Stick - Remove".
Remove the stick cylinder. Refer to Disassembly and Assembly, "Stick Cylinder - Remove".
Remove the boom cylinder. Refer to Disassembly and Assembly, "Boom Cylinder - Remove".
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Note: Put identification marks on all hose assemblies for installation purposes. Plug all hoses. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Illustration 1 g00909431
Disconnect hose assemblies (1) .
Use a suitable lifting device in order to lift the boom evenly. The weight of the boom is approximately 390 kg (860 lb). Put tension on the lifting device.
Remove pin (3) .
Remove boom (2) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts arm Caterpillar catalog:
621H, 623H, 627H, 824G II, 824H, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G II, 980H, 988G, 98...
554, 564, 574B, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 844, 844H, 854G, 854K, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II,...
824G, 824G II, 825G, 825G II, 826G, 826G II, 834G, 836G, 844, 854G, 950G, 962G, 966G, 972G, 972G II, 980G, 980G II, 988G, 990 II, 992G, IT62G
2599404
ARM AS-LIFT
980G II
980G II
8Y6349
ARM AS-WIPER
980G II, 980H, 988F, 988F II, 992D
980G II, 980H, 988F, 988F II, 992D
1794876
ARM-BAIL
980G II, 980H, 986H
980G II, 980H, 986H
2065591
ARM AS-TILT
980G II, 980H
980G II, 980H
2494130
ARM-BAIL
980H
980H
3535197
ARM-BAIL
980H, 980K, 980M, 982M
980H, 980K, 980M, 982M
3571034
ARM AS-LIFT
980H
980H
3209092
ARM AS
980H
980H
1787180
ARM AS
980G II
980G II
2429531
ARM & BEARING AS
HA771, HA871, TK371, TK381
HA771, HA871, TK371, TK381
2466279
ARM AR-LIFT
994F, 994H
994F, 994H
3854335
ARM AS-LIFT
962H
962H
2899888
ARM GP-MATERIAL HANDLING
938H, FUSION, IT38H, IT62H
938H, FUSION, IT38H, IT62H
2357301
ARM & BEARING AS-LIFT
928HZ, 930G
928HZ, 930G
3544314
ARM AS-LIFT
980H
980H
3544313
ARM AS-LIFT
980H
980H