ARM 2G8570 - Caterpillar

Illustration 152 g01042689
Separate valve housing (43) from transmission housing (19) .
Illustration 153 g00896476
Remove O-ring seals (252) . Remove any shims from the valve housing.
Illustration 154 g01036003
Remove screw (255) and locking plate (254) from valve housing (43). Remove solenoid (253) and the O-ring seals from valve housing (43) .
Illustration 155 g01036009
Remove nuts (259) and washers (258) in order to remove solenoids (256) and (257) and the O-ring seals from valve housing (43) .
Illustration 156 g01116763
Use Tooling (M) in order to remove bearing cups (263) and (261) from transmission housing (19) .
Remove bolts (262) that secure cover (260) for the output shaft and the countershaft to transmission housing (19) .
Illustration 157 g01117381
Separate cover (260) from transmission housing (19) .
Illustration 158 g01116769
Use Tooling (F) in order to remove seal (264) from cover (260) .
Illustration 159 g01116775
Use Tooling (M) in order to remove bearing cups (265) and (266) from transmission housing (19) .
Illustration 160 g01116625
Remove bolts (267) that secure speed sensors (268) and (269) to transmission housing (19). Remove bolt (270) that secures speed sensor (271) and remove the three sensors from the transmission housing.
Illustration 161 g00896542
Remove O-ring seals (272) from speed sensors (268), (269), and (271) .
Illustration 162 g01042705
Remove torque converter relief valve (273) from transmission housing (19) .
Illustration 163 g01036140
Remove O-ring seals (274) and (275) from torque converter relief valve (273) .
Illustration 164 g01042811
Remove pressure regulator valve (276) from transmission housing (19) .
Illustration 165 g01036143
Remove O-ring seals (277) and (278) from pressure regulator valve (276) .