3728074 ARM AS Caterpillar parts
966M, 966M XE, 972M, 972M XE, 980M, 982M
Rating:
Alternative (cross code) number:
CA3728074
372-8074
3728074
CA3728074
372-8074
3728074
Weight: 5 pounds 2 kg.
WHEEL LOADER,
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers 1 Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00613071
Remove clip (4). Clip (4) is located between the governor and the cylinder head.
Illustration 2 g00655975
Use Tooling (A) to slide tube assembly (5) into the cylinder head.
Illustration 3 g00613149
Remove the clip and use Tooling (A) to remove the clevis pin (6). Clevis pin (6) connects the governor to the control lever of the fuel injection control linkage. Note: Clevis pin (6) must stay with the governor in order to be adjusted.
Illustration 4 g00630566
Remove bolts (1) and remove fuel injection control linkage (2). Control lever (3) connects the fuel injection control linkage (2) to the governor. Note: For information on the inspection procedure for control lever (3), refer to Special Instruction, REHS0601, "Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 136-4149 Governor Pliers 1 Start By:
Remove the rocker shaft and the pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00613071
Remove clip (4). Clip (4) is located between the governor and the cylinder head.
Illustration 2 g00655975
Use Tooling (A) to slide tube assembly (5) into the cylinder head.
Illustration 3 g00613149
Remove the clip and use Tooling (A) to remove the clevis pin (6). Clevis pin (6) connects the governor to the control lever of the fuel injection control linkage. Note: Clevis pin (6) must stay with the governor in order to be adjusted.
Illustration 4 g00630566
Remove bolts (1) and remove fuel injection control linkage (2). Control lever (3) connects the fuel injection control linkage (2) to the governor. Note: For information on the inspection procedure for control lever (3), refer to Special Instruction, REHS0601, "Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage".
Cat SIS web machinery list:
Parts arm Caterpillar catalog:
3728073
ARM AS
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
3728072
ARM AS-MOUNTING
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
3728071
ARM AS-MOUNTING
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
4344615
ARM AS-WINDOW WIPER
950H, 962H, 980H
950H, 962H, 980H
2833450
ARM GP-WINDOW WIPER
140M, 14M, 160M, 824K, 825K, 826K, 834K, 836K, 988K
140M, 14M, 160M, 824K, 825K, 826K, 834K, 836K, 988K
3764919
ARM AS-MOUNTING
824K, 825K, 826K, 834K, 836K, 988K
824K, 825K, 826K, 834K, 836K, 988K
4250080
ARM AS-WINDOW WIPER
950 GC
950 GC
4250077
ARM GP-WINDOW WIPER
950 GC
950 GC
3875950
ARM AS-LIFT
950 GC
950 GC
3875970
ARM AS-LIFT
950 GC
950 GC
3696008
ARM AS-LIFT
966M, 966M XE, 972M XE
966M, 966M XE, 972M XE