ARM GP-LIFT 3854336 - Caterpillar

Illustration 1 g03216176
Typical example
Front view of engine
Table 1
Specification for 151-0427 Engine Oil Lines Gp, 188-9086 Engine Oil Lines Gp, and 156-5562 Engine Oil Lines Gp
Item Qty Part Specification Description
1 1 155-4843 Engine Oil Filter Gp Arrow in the oil filter head casting points in the direction as oil flow in the system. Refer Illustration 1.
2 1 185-6684 Breather As Before assembly, apply white Loctite Low Breakloose PST to the threads.
3 1 032-1268 Connector Before assembly, apply white Loctite Low Breakloose PST to the threads.
4 1 5S-2403 Fitting Before assembly, apply white Loctite Low Breakloose PST to the threads.
5 1 8J-4351 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
Illustration 2 g03216177
Right side view of engine
Table 2
Item Qty Part Specification Description
6 1 8L-2786 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
7 1 5E-4852 Relief Valve Adjust the pressure relief valve according to Systems Operation/Testing and Adjusting, "Electrohydraulic Oil Pressure - Measure".
8 1 129-3096 Sight Gauge Use the following procedure in order to tighten the sight gauge:
1. Tighten fitting into tank to 17 1 N m (150 9 lb in).
2. Loosen the swivel.
3. Set the gauge angle.
4. Tighten swivel to 17 1 N m (150 9 lb in).
9 1 006-6586 Hose Connector Before assembly, apply white Loctite Low Breakloose PST to the threads.