3Q0544 ARM AS Caterpillar parts
D6R
Rating:
Alternative (cross code) number:
CA3Q0544
3Q-0544
3Q0544
CA3Q0544
3Q-0544
3Q0544
Weight: 71 pounds 32 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 3Q0544:
Number on catalog scheme:
13
For full view, you need register
Information:
Removal Procedure
Start By:
Remove right side engine enclosure.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct recovery and recharge procedures. Refer to Dealer Service Tool Catalog, NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g02954885
Refer to Operations and Maintenance Manual, "Belt - Inspect/Replace" for correct removal and installation of belt (1) .
Illustration 2 g02957117
Remove nuts and disconnect tube assemblies (2) .
Illustration 3 g02957139
Disconnect harness assembly (3).
Remove bolts (4) and refrigerant compressor (5.) Installation Procedure
Install refrigerant compressor (5) in the reverse order of removal.
Tighten nuts (2) to a torque of 21 3 N m (186 27 lb in)
Start By:
Remove right side engine enclosure.
Personal injury can result from contact with refrigerant.Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.Personal injury or death can result from inhaling refrigerant through a lit cigarette.Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct recovery and recharge procedures. Refer to Dealer Service Tool Catalog, NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g02954885
Refer to Operations and Maintenance Manual, "Belt - Inspect/Replace" for correct removal and installation of belt (1) .
Illustration 2 g02957117
Remove nuts and disconnect tube assemblies (2) .
Illustration 3 g02957139
Disconnect harness assembly (3).
Remove bolts (4) and refrigerant compressor (5.) Installation Procedure
Install refrigerant compressor (5) in the reverse order of removal.
Tighten nuts (2) to a torque of 21 3 N m (186 27 lb in)
Caterpillar parts catalog:
Parts arm Caterpillar catalog:
3Q0534
ARM AS
D6R
D6R
3Q0535
ARM AS
D6R
D6R
3Q0535
ARM AS
D6R
D6R
3Q0534
ARM AS
D6R
D6R
330 L, 330B, 936F, D5H, D6G, D6H, D7H
1953941
ARM AS
D6R III
D6R III
1285201
ARM AS
D6N
D6N
1274124
ARM AS
D6N
D6N
1274135
ARM AS
D6N
D6N