ARM & BEARING AS-LIFT 3V7354 - Caterpillar

Removal Procedure
Start By:
Remove the engine oil filter and the engine oil filter base. Refer to Disassembly and Assembly, "Engine Oil Filter Base - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00468427
Loosen two hose clamps (1) .
Illustration 2 g00468428
Disconnect hose assembly (5). Disconnect clip (3) for the engine oil level gauge. Remove three bolts (4) and remove engine oil cooler (2). The weight of the engine oil cooler is 18 Kg (40 lb).