4346243 ARM AS Caterpillar parts
M315D 2, M317D 2
Rating:
Alternative (cross code) number:
CA4346243
434-6243
4346243
CA4346243
434-6243
4346243
Weight: 5 pounds 2 kg.
WHEELED EXCAVATOR,
Number on catalog scheme:
5
For full view, you need register
Information:
Duplex Non A&P Installation
Illustration 3 g03828522
(1) 3S-2093 Cable Strap (X 3)
(2) 274-6719 Pressure Sensor Gp
(3) 329-5451 Adapter As
(4) 490-0100 Snubber
(5) 214-7568 O-Ring Seal
(6) 315-9835 Elbow As
(7) 321-8673 Connector As
(8) 250-1424 Elbow As
(9) 8T-8911 Bolt (X 2)
(10) 6V-8189 Nut (X 2)
(11) 8T-4224 Hard Washer (X 4)
(12) 371-7152 Connector As
(13) 228-7100 O-Ring Seal
(14) 288-3783 Temperature Sensor
(15) 132-5789 Clip
(16) 7K-1181 Cable Strap (X 2)
(17) 123-0555 Manifold
(18) 398-5601 Plug As
(19) 471-9705 Hose As
(20) 175-9106 Elbow As
(21) 352-3964 Clip
(22) 389-3708 Plug As
(23) 329-5474 Tee As
(24) 473-2184 Bracket
(25) 371-5635 Fuel Line
Assemble items on engine as shown.
Illustration 4 g03831631
(A) 90 mm (3.54 inch)
(B) 40 mm (1.57 inch)
(26) Hole
A 1.5 cm (0.600 inch) hole can be drilled in location (29) in the existing 392-4104 Bracket rather than replacing with (24).
Connect “Fuel Press” harness to sensor (2). This harness has C991 signal wire.
Remove and discard the “Fuel Press (Post Filter)” label from the connector with signal wire P792.
Ensure that flash file is the latest version.
Start engine and check for proper operation.Duplex A&P Installation
Illustration 5 g06074446
(1) 3S-2093 Cable Strap (X 3)
(2) 274-6719 Pressure Sensor Gp (X 2)
(3) 214-7568 O-Ring Seal (X 2)
(4) 437-8955 Valve (X 2)
(5) 214-7566 O-Ring Seal (X 2)
(6) 490-0100 Snubber
(7) 315-9835 Elbow As
(8) 321-8673 Connector As
(9) 250-1424 Elbow As
(10) 8T-8911 Bolt (X 2)
(11) 6V-8189 Nut (X 2)
(12) 8T-4224 Hard Washer (X 4)
(13) 371-7152 Connector As
(14) 228-7100 O-Ring Seal
(15) 288-3783 Temperature Sensor
(16) 132-5789 Clip
(17) 7K-1181 Cable Strap (X 2)
(18) 123-0555 Manifold
(19) 398-5601 Plug As
(20) 473-2184 Bracket
(21) 471-9705 Hose As
(22) 175-9106 Elbow As
(23) 352-3964 Clip
(24) 329-5474 Tee As
(25) 371-5635 Fuel Line
Assemble items on engine as shown.
Illustration 6 g03831633
(A) 90 mm (3.54 inch)
(B) 40 mm (1.57 inch)
(28) Hole
A 1.5 cm (0.600 inch) hole can be drilled in location (28) in the existing 392-4104 Bracket rather than replacing with (21).
Connect “Fuel Press” harness to sensor (2). This harness has C991 signal wire.
Remove and discard the “Fuel Press (Post Filter)” label from the connector with signal wire P792. Connect this wire to sensor (2).
Ensure that flash file is the latest version.
Start engine and check for proper operation.
Illustration 3 g03828522
(1) 3S-2093 Cable Strap (X 3)
(2) 274-6719 Pressure Sensor Gp
(3) 329-5451 Adapter As
(4) 490-0100 Snubber
(5) 214-7568 O-Ring Seal
(6) 315-9835 Elbow As
(7) 321-8673 Connector As
(8) 250-1424 Elbow As
(9) 8T-8911 Bolt (X 2)
(10) 6V-8189 Nut (X 2)
(11) 8T-4224 Hard Washer (X 4)
(12) 371-7152 Connector As
(13) 228-7100 O-Ring Seal
(14) 288-3783 Temperature Sensor
(15) 132-5789 Clip
(16) 7K-1181 Cable Strap (X 2)
(17) 123-0555 Manifold
(18) 398-5601 Plug As
(19) 471-9705 Hose As
(20) 175-9106 Elbow As
(21) 352-3964 Clip
(22) 389-3708 Plug As
(23) 329-5474 Tee As
(24) 473-2184 Bracket
(25) 371-5635 Fuel Line
Assemble items on engine as shown.
Illustration 4 g03831631
(A) 90 mm (3.54 inch)
(B) 40 mm (1.57 inch)
(26) Hole
A 1.5 cm (0.600 inch) hole can be drilled in location (29) in the existing 392-4104 Bracket rather than replacing with (24).
Connect “Fuel Press” harness to sensor (2). This harness has C991 signal wire.
Remove and discard the “Fuel Press (Post Filter)” label from the connector with signal wire P792.
Ensure that flash file is the latest version.
Start engine and check for proper operation.Duplex A&P Installation
Illustration 5 g06074446
(1) 3S-2093 Cable Strap (X 3)
(2) 274-6719 Pressure Sensor Gp (X 2)
(3) 214-7568 O-Ring Seal (X 2)
(4) 437-8955 Valve (X 2)
(5) 214-7566 O-Ring Seal (X 2)
(6) 490-0100 Snubber
(7) 315-9835 Elbow As
(8) 321-8673 Connector As
(9) 250-1424 Elbow As
(10) 8T-8911 Bolt (X 2)
(11) 6V-8189 Nut (X 2)
(12) 8T-4224 Hard Washer (X 4)
(13) 371-7152 Connector As
(14) 228-7100 O-Ring Seal
(15) 288-3783 Temperature Sensor
(16) 132-5789 Clip
(17) 7K-1181 Cable Strap (X 2)
(18) 123-0555 Manifold
(19) 398-5601 Plug As
(20) 473-2184 Bracket
(21) 471-9705 Hose As
(22) 175-9106 Elbow As
(23) 352-3964 Clip
(24) 329-5474 Tee As
(25) 371-5635 Fuel Line
Assemble items on engine as shown.
Illustration 6 g03831633
(A) 90 mm (3.54 inch)
(B) 40 mm (1.57 inch)
(28) Hole
A 1.5 cm (0.600 inch) hole can be drilled in location (28) in the existing 392-4104 Bracket rather than replacing with (21).
Connect “Fuel Press” harness to sensor (2). This harness has C991 signal wire.
Remove and discard the “Fuel Press (Post Filter)” label from the connector with signal wire P792. Connect this wire to sensor (2).
Ensure that flash file is the latest version.
Start engine and check for proper operation.
Caterpillar parts catalog:
Parts arm Caterpillar catalog:
4396411
ARM AS
303E CR
303E CR
3830310
ARM AS
303.5E, 304E, 305.5E, 305E, 901C, 902C, 903C
303.5E, 304E, 305.5E, 305E, 901C, 902C, 903C
3467443
ARM AS-WIPER
324D L, 324E, 324E LN, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D, 336D L, 336D LN, 336E, 336E H, 336E HVG, 336E LH, 336E LN, 345D, 345D L, 345D L VG, 349E, 349E L HVG, 349E L VG, 374F L, 390F L, M3...
324D L, 324E, 324E LN, 329D L, 329D LN, 329E, 329E L, 329E LN, 330D, 336D L, 336D LN, 336E, 336E H, 336E HVG, 336E LH, 336E LN, 345D, 345D L, 345D L VG, 349E, 349E L HVG, 349E L VG, 374F L, 390F L, M3...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L...
3717140
ARM AS-SUSPENSION
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
312D, 312D2 GC, 313D, 313D2, 313D2 LGP, 315D L, 318D L, 318D2 L, 320D, 320D FM, 320D GC, 320D L, 320D2, 320D2 GC, 320D2 L, 323D L, 323D2 L, 324D, 326D L, 329D, 329D L, 336D, 336D L, 336D2, 340D L, 340...
2708330
ARM AS-STABILIZER
M313D, M315D, M315D 2, M317D 2
M313D, M315D, M315D 2, M317D 2
5V2406
ARM ASSEM.
215, 227, 229, 235, 235C, 245, 245B
215, 227, 229, 235, 235C, 245, 245B
5C4411
ARM
215
215
120G, 12E, 140, 235, 631C, 641, AD40, AD45, AE40, D10, D4E, D5B, D6D, D7G, D8K, D9G
8K3842
ARM
235, 235B, 235C
235, 235B, 235C
7F6993
ARM
120, 12E, 14E, 225, 245, 631C, 641, 651, D7F, D7G, D8H, D9E, D9G
120, 12E, 14E, 225, 245, 631C, 641, 651, D7F, D7G, D8H, D9E, D9G
307, 307B, 311, 312, 315, 320, 320 L, 320N, 322, 322 FM L, 325, 325 L, 325 LN, 330, 330 FM L, 330 L