4H9809 ARM ASSEM. (IN.) Caterpillar parts
594, D353C, D9E, D9G, D9H, G353D
Rating:
Alternative (cross code) number:
CA4H9809
4H-9809
4H9809
CA4H9809
4H-9809
4H9809
Weight: 1 pounds 0 kg.
GAS ENGINE, TRACK-TYPE TRACTOR,
Compatible equipment models: 4H9809:
Number on catalog scheme:
None
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02315333
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from crankshaft position sensor (3).
Remove bolt (4) from the cylinder block.
Carefully remove crankshaft position sensor (3) from the cylinder block. Note: Do not use a lever to remove the crankshaft position sensor from the cylinder block.
Remove O-ring seal (5) from crankshaft position sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02315333
Install a new O-ring seal (5) to crankshaft position sensor (3). Note: Do not lubricate the O-ring seal.
Install crankshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N m (124 lb in).
Connect harness assembly (1) to crankshaft position sensor (3). Slide locking tab (2) into the locked position.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02315333
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from crankshaft position sensor (3).
Remove bolt (4) from the cylinder block.
Carefully remove crankshaft position sensor (3) from the cylinder block. Note: Do not use a lever to remove the crankshaft position sensor from the cylinder block.
Remove O-ring seal (5) from crankshaft position sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02315333
Install a new O-ring seal (5) to crankshaft position sensor (3). Note: Do not lubricate the O-ring seal.
Install crankshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N m (124 lb in).
Connect harness assembly (1) to crankshaft position sensor (3). Slide locking tab (2) into the locked position.
Cat SIS web machinery list:
Parts arm Caterpillar catalog:
594, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, D9E, D9G, D9H, G353D, G379, G398, G399
3L1198
ARM
D353C, D379, D398
D353C, D379, D398
7F6993
ARM
120, 12E, 14E, 225, 245, 631C, 641, 651, D7F, D7G, D8H, D9E, D9G
120, 12E, 14E, 225, 245, 631C, 641, 651, D7F, D7G, D8H, D9E, D9G
120G, 12E, 140, 235, 631C, 641, AD40, AD45, AE40, D10, D4E, D5B, D6D, D7G, D8K, D9G
772, 777, 992, D9G, D9H
12E, 14E, 621B, 637D, 826B, D4D, D9G, D9H
4H4202
ARM
D9E
D9E
7H9466
ARM ASSEM
D8H, D9E
D8H, D9E
2M5808
ARM
D326F, D337F, D342, D342C, D353C, D375D
D326F, D337F, D342, D342C, D353C, D375D
4M4266
ARM ASSEM.
12E, 1673, 1673B, 561B, 951B, 955H, 955K, 977H, 977K, D320A, D330A, D330B, D333A, D333B, D4D, G3306
12E, 1673, 1673B, 561B, 951B, 955H, 955K, 977H, 977K, D320A, D330A, D330B, D333A, D333B, D4D, G3306
12E, 1673, 1673B, 561B, 951B, 955H, 955K, 977H, 977K, D320A, D330A, D330B, D333A, D333B, D4D, G3306
9B8875
ARM
12E, 955C, D320A, D330A, D333A, D342, D342C, D353C, D364, D8H, D9E, D9G
12E, 955C, D320A, D330A, D333A, D342, D342C, D353C, D364, D8H, D9E, D9G
1P7310
ARM ASSEM.
650B, 772, 773, 777, 992, D346, D348, D349
650B, 772, 773, 777, 992, D346, D348, D349
641B, D398
4F8990
ARM
D315
D315
8B7014
ARM
D315, D326F
D315, D326F
5N3315
ARM
3512
3512
9B8967
ARM
D315, D326F, D337, D337F, D342, D353C
D315, D326F, D337, D337F, D342, D353C
2L4853
ARM
3304, 3306, D320A, D342, D342C, D343, D353C, G3306, G342C, G343
3304, 3306, D320A, D342, D342C, D343, D353C, G3306, G342C, G343
3S4136
ARM ASSEM.
650B, 773, 992, D346, D348
650B, 773, 992, D346, D348