ARM A 5P8672 - Caterpillar

Illustration 1. Location of 6T8046 Solenoid Valve Group (1).1. Remove the cover from the frame. Disconnect the wiring and oil lines from solenoid valve group (1). Remove the solenoid valve group.
Illustration 2. Mounting block (2).2. Remove and position mounting block (2) as shown in illustration 3.
Illustration 3. Dimensions needed to install mounting block (2).Dimensions to locate mounting block (2).
Illustration 4. Outlet ports (3).3. The oil lines that connect to outlet ports (3) may need extensions or be routed around the rear of the bolster to be connected to the lockvalve.4. Reconnect the wiring and the oil lines. Use four new 6V8397 Seals when connecting the hose assemblies to the inlet and outlet ports.5. Check all connections for leaks and make repairs as needed. Install all covers that were removed.