ARM AS-PUSH-RH 7T7529 - Caterpillar

Installation Procedure
Illustration 1 g00472231
Install the pilot control valves. Install the washers and four nuts (8) .Note: Check the condition of all seals and of all components. If any parts are worn or damaged, use new parts for replacement.
Illustration 2 g00472228
Install fifteen hose assemblies (6) .
Illustration 3 g00472229
Connect wiring harness (7) .
Start the engine in order to purge air from the system. Check for leaks. Tighten the hoses if leaks are detected. Operate each of the implements in order to ensure accuracy of the installation. This will also allow you to remove any air from the system.
Illustration 4 g00472227
Install the plastic cover and bolts (5) .
Illustration 5 g00472206
Install bolts (4) into the top of the cover.
Install handle (3). Install handles (2). Tighten locknuts (1) against the bases of handles (2) .