ARM & BEARING AS-LIFT 8X0741 - Caterpillar

Illustration 1 g00790510
203-5483 Bank Valve (Four) (1) Stick control valve (2) Bucket control valve (3) Swing control valve (4) Boom control valve (5) Torque for the plug ... 70.0 7.0 N m (52.00 5.00 lb ft) (6) 202-2236 Bank Cover and Valve Gp (7) Torque for the relief valve ... 70.0 7.0 N m (52.00 5.00 lb ft) (8) Solenoid valve for the hydraulic shutoff circuit Torque for nut (9) ... 9.5 1.5 N m (7.00 1.00 lb ft) Torque for the solenoid ... 50.0 5.0 N m (37.00 3.00 lb ft) Nominal voltage for the coil ... 12 VDC Maximum voltage ... 14.5 VDC Resistance at a temperature of 25.0° 5.0°C (77.00° 9.00°F) ... 10.5 0.3 Ohms (10) The O-ring plug Torque for the O-ring plug ... 14.0 1.0 N m (10.00 1.00 lb ft) Torque for the orifice ... 6.8 0.5 N m (60.00 4.00 lb in) (11) Torque for the plug ... 70.0 0.5 N m (52.00 0.4 lb ft) (12) Outlet (13) Solenoid valve for the side shift lock circuit Torque for nut (14) ... 5.5 1.5 N m (4.00 1.00 lb ft) Torque for the solenoid ... 50.0 5.0 N m (37.00 3.00 lb ft) Nominal voltage for the coil ... 12 VDC Maximum voltage ... 14.5 VDC Resistance at a temperature of 25.0° 5.0°C (77.00° 9.00°F) ... 10.5 Ohms (15) Torque for the nuts ... 27.0 3.0 N m (20.00 2.00 lb ft)Note: Place three 4T-2723 Shims between the valve sections during assembly. Place one shim over each stud. The shims are necessary in order to prevent the spool from binding in the valve body.